5 - FAN MODES 5.1 Fan Auto Mode

How to set up the mode The Vega MK II has got four possible fan speeds: minimum, medium, maximum andextra-maximum. When you select this mode, on the panel, both the Auto and the speed probes, set out from the panel, blink. The more the ambient temperature is different from the set value, the higher is the fan speed. When the panel is on Press the Arrow for boat Down button > [Fan] > Press the S button > Press the Arrow Up or the Arrow Down button to select [A] > Press the s button With the remote-control device Press more times the Fan button to read [A] on the display.

5.2 Fan Manual Mode

There are four possible fan speeds: minimum, medium, maximum and extra-maxi- mum. How to set up the mode When the panel is on Press the Arrow Down button > [Fan] Press the S button > Press the Arrow up or the Arrow Down button to select the desired speed [1] [2] [3] [4] > Press the S button With the remote-control device Press more times the Fan button to select the desired speed [1] [2] [3] [4].

5.3 Fan control parameters

Parameter CO1 (Default=All) Maximum speed to be used in Fan Auto Mode. How to set the p arameter CO1 When the panel is off Press the S button > [CO1] > Press the S button > Press the Arrow Up or the Arrow Down button to select the desired value [All] [no4] o [no3] > Press the S button Parameter CO2 (Default=All) Minimum speed to be used in Fan Auto Mode. How to set the p arameter CO2 When the panel is off Press the S button (for 3 seconds) > [CO1] > Press the Arrow Down button to select [CO2] > Press the S button > Press the Arrow Up or the arrow Down button to select the desired value [All] o [no1] > Press the S button Pag. 9