| 4.2 - BULBO DEL TERMOSTATO PER EVAPORATORI. II bulbo del termostato, deve essere posizionato in aria, all'interno del cella (vedi fig. 1 ). 4 - THERMOSTAT FOR ICE BOXES WITH EVAPORATOR 4.1 - ADJUSTING THE THERMOSTAT The thermostat has a graduated knob: "+30°C" corresponds to the warmest setting, while "-30°C" corresponds to the coldest one. In case it is installed in fridge box, we recommend setting the thermostat at +4°C approximately. In case it is installed in freezer box, we recommend setting the thermostat at -18°C approximately. 5.2 - THERMOSTAT BULB FOR EVAPORATORS. The thermostat bulb should be installed in the air, inside the Ice box (see fig. 1 ). 4 - THERMOSTAT POUR REFRIGERATEURS AVEC EVAPORATEURS 4.1 - REGLAGE DU THERMOSTAT Le thermostat a une poignée graduée: la valeur "+30"C" correspond au réglage le plus chaud, tandis que la valeur "-30°C" correspond au réglage le plus froid. En cas d'installation dans une réfrigérateurs on conseille de régler le thermostat à +4°C environ. En cas d'installation dans un conservateur on conseille de régler le thermostat à -18°C environ. 5.2 - BULBE DU THERMOSTAT POUR EVAPORATEUR. La bulbe du thermostat doit être placé en l'air, à l'intérieur de la cuve froide (voir fig. 1 ). |