Fridges & Freezers Boxes STAINLESS STEEL
SERIE MS Series 3. INSTALLATION 3.1 Doors/hinges for boats
IF IT IS NECESSARYFOR INSTALLATION EXIGENCIES TO CHANGE THE OPENING, READ WITHGREAT ATTENTION THE FOLLOWING INSTRUCTIONS. HINGE AND HANDLE REVERSAL

12 4 3

Release the hingeplastic cover. Unscrew the hinge screws on the cabinet top. Removing the hinge, pay attention to thedoor flection. Keep it clo-sed until the hinge pin has been unhooked. DON’T FLEX BACK THE DOOR. After having unscrewed the door, screw the hin-ges on the opposite side (following the inverted dismounting instructions). First of all, fasten theinferior hinge, then hook the door and finallyfasten the superior hinge. Hook the handle to the fridge/freezer, Follow the instructions on page 7. DURING THE DISMOUNTING, PAYATTENTION NOTTO LOSE THE RIN- GLETS ON THE INFERIOR HINGE. HOOK THE DOOR PUTTING THE RIN- GLETS AS WE CAN SEE IN THE PICTU- RE. First of all, unscrew the handlefrom the door and from its sup- port. Then unscrew the corre- sponding handle hook-up on the box door side. IMPORTANT: There are hin-ges both at the top and at the bottom. ATTENTION
Unscrewing the hinges, pay attentionnot to incline the fridge/freezer to avoid ruining its corners. After having hooked the handle, adjust the door. Make sure that allscrews are tightened and then screw the plastic cover. Page 7