Fridges & Freezers Boxes STAINLESS STEEL
SERIE MS Series 5. USE INSTRUCTIONS 5.1 Switching on
To switch on the fridge/freezer, check that that the power is available and turnthe thermostat to ON to start the compressor. After few minutes the fridge/free- zer will cool down. Then wait for 20 minutes before putting the food inside. 5.2 Switching off (no use)
If you don’t use the equipment for a long time, follow these instructions:- cut off the power to the fridge/freezer circuit; - take off the foods from the fridge/freezer and defrost the latter, emptying fre-quently the condensation tray, and clean it.Then, don’t close the door to avoid mould and bad smells. 5.3 Temperature regulation
To regulate the temperature in the fridge/freezer, turn the ther- mostat to the desired temperature and wait for some minutes until it is reached. If it is the first switching on after a long period of no use, wait for some minutes and check that the fridge/free- zer is cooling down. 5.4 Condensation tray emptying
In the models equipped with the tray, while the fridge/freezer is operating, it is advisable to check at least once a week if there is eventually water in the tray. In this case, empty it and mop it well to avoid mould and bad smells. Page 22