Fridges & Freezers Boxes STAINLESS STEEL

SERIE MS

Series 3. INSTALLATION 3.12 Door with panel

It is possible to panel both the fridge and the freezer door.The kit includes one single profile to be bent.To fasten them, follow these instructions:

1

- take down the door (instructions on page 7 - 3.1);

2

- bend the profile along the arranged line (picture 1);

3

- bend inside tongues to 90° (picture 2);

4

- drill a hole into the door inside next to the tongues (picture 3);

5

- locate the panel (3 mm thick) (picture 4);

C CB

6

- locate the panel C and the frame composed by the two ele-ments:Aand B (picture 5);

7

- tighten the screws;

8

- take up the door (instructions on page 7 - 3.1)

A

picture 2picture 5 picture 4 picture 3 picture 1

Page