Text version of the page 
Fridges & Freezers Boxes STAINLESS STEEL
SERIE MS
Series 3. INSTALLATION 3.11 Optional external thermostat
It is possible to install digital thermostats for fridges and freezers. You can insert these thermostats in the
risers (as you can see in the picture) if it is a one-unit or in the risers/spacers if it is a multiple unit, composedby fridge and freezer (see “Components table” on page 5-6). The digital thermostat has not to be installed near thebox. In this case you can fix it on the wall, as you can see
in the picture, through a stainless steel frame. You must put the bulb of the digital
thermostat in the fridge/freezer (A). The wire must pass into the hole of
the box back (B). Then it must follow
the internal edge line. The correct
position is at half height. The bulb
must not come into contact with the
walls and the food inside.
The wire must be fastened by an alu-
minium adhesive tape or by some
silicone. It is necessary to seal the
hole.
BA Page
19