Fridges & Freezers Boxes STAINLESS STEEL

SERIE MS

Series 3. INSTALLATION 3.4 Condensation outlet

All fridges/freezers of the Stainless Steel series have got the condensation outlet on the back side. (as in the picture on the left)
Comprehensive view and position of the condensation outlet hole

1

To the condensation outlet you must fasten a curve rub- ber holder (Cod. M68995) and connect a pipe with a stainless steel clamp (since the fridge causes humidityall around, pay attention to materials in contact with it).

2

To avoid unpleasant smells coming from condensationtrays go into the fridge/freezer, installing the condensation outlet pipe, it is necessary to create a syphon below the fridge/freezer level.Pay attention to the pipe position. Locating the box in thechosen position, don’t crush or bend in a n anomalous way the pipe to maintain it functional.Check also that the condensation outlet drains correctly,pouring a congrous quantity of water into the stainless steel cabinet when it is located and before switching it on.

3 4

Page