Fridges & Freezers Boxes STAINLESS STEEL

SERIE MS

Series 3. INSTALLATION 3.3 Measures

To locate the fridge/freezer, you must consider not only the bulk measures on page 9 (and in the table 3.5 on pages 11- 12) but also the holes for the electrical connection wires and for the eventual condensation outlet. Since precharged pipes protude from the box, it is necessary a respect area: avoid sharp bends (their radius must be superior to 50 mm). During the fridge/freezer installation, for its maintenance, it isIMPORTANTto make as easy as possible the accessibility to connections, unions and waste pipes.

Respect area for an easy use

Locating the fridge/freezer, it is necessary to respect the surrounding area to open completely the door and so eventually drawers and to execute easily all operations inside.

Respect area

To locate the fridge/freezer you must consider the bulk measures on page 9, corresponding to the chosen cabi- net.

Model (litres) FRIDGEC / mm B / mm D / mm 42 400342 79280 490415 955115 500465 1015130 500510 1060160 565530 1145180 500465 1015FREEZER60 500515 106580 550560 116090 565580 1195110 565580 1195WINE COOLERS115 500515 1065130 550560 1160160 565580 1195

IMPORTANT

Mounting instructions: The fridge/freezer must be located easily.Moving it, it is better to keep its protection and pay any-way great attention. If necessary, take off the door.