Fridges & Freezers Boxes STAINLESS STEEL

SERIE MS

Series 3. INSTALLATION 3.3 Measures

Bulk measures have been calculated counting in also eventual bulges due to the following objects: feet: 25 mm handle hook-up: 5 mm hinge for boat: 10 mm screws bulges: 3 mm To locate the fridge/freezer, consider the following bulk measures for the different models.

Bulk measures

model/litres FRIDGE
L=lenght / mmP=depth / mmA=height / mm 42 400342545 80 490415635 115 500465875 130 500510780 160 565530875 180 5004651035 FREEZER60 500515875 80 550560780 90 565580740 110 565580875 WINE COOLERS115 500515875 130 550560780 160 565580875

1

To locate the fridge/frrezer you must consider that thehandle hook-up must be fastened in a niche as in the pic- ture on the right. (Don’t remove feet!)* The space lack for the air circulation can cause condensation, that in the worst case can get rot the eventual wood or cause mould on fibreglass surfaces.

2

Because of the difference in temperature bet-ween inside and outside the cabinet it is neces- sary to let some space (for all sides) between the fridge/freezer walls and the walls of the sur- rounding pieces of furniture, it must be located between.
*If you must remove feet because of installation exi- gencies, it is necessary to create some space for the air circulation between the cabinet and the bearing plane.

Page