AIR-CONDITIONERS

COMPACT and SPLIT QUATTRO models
3 INSTALLATIONOFTHECOMPONENTS

3.5 - FASTENING

The fastening must be executed as indicated. NEOPRENE
Figure 1.8 Dis 2.8 Figure 2.8

3.6 - CONDENSATIONOUTLET

The air-conditioning determines the separation ofthe condensation water due to the humidity of the conditioned air. This condensation must be dis- charged in the bilge or in a special tank and then by means of a self-priming pump in the sea. The direct bulkwark outlet is not the best solution: in fact, it can suck up unpleasant smells due to the exhaust emissions of its own or of other engines. Make reference to the safety regulations of the different countries The water condensation outlet pipe must be linked to the rubber- holders of 19 mm on the condensation collection basin.
Each unit is endowed with two out- lets, as you can see in the picture above. If the condensation discharge pipe for exigencies of installation must be long, it is better to use the special “L” connection. You must avoid such an installation as you can see in the picture 1.8 because the condensation water can stop and flow back to the collection basin because of the boat suppliers rocking. page 8

www.climma.it