AIR-CONDITIONERS

COMPACT and SPLIT QUATTRO models
3 INSTALLATIONOFTHECOMPONENTS E.- The air-conditioner is connected to the electricalbox through cables of different lenght. So there must be an accessible space (next to the compressor unitfor SPLIT models) to install the electrical box.F.- The thermostat bulb and the aspiration filter mustbe mounted on the air-refrigerating gas exchanger for boat. This side must be accessible for the filter mainte- nance.G.- The maximum distance between the control paneland the electrical box is 3 m both for the thermostat capillary and for the connection cable.

3.4 - THERMOSTATBULB

The thermostat bulb must be fastened to the air exchanger by means of special latches. The bulb must keep separated from the exchanger because it must be influenced only by the sucked up air, but not by the refrigerating circuit. Sometimes you can install the bulb not directly on the exchan- ger but in the room, so that it is sensitive to the ambi- ent temperature. To fasten the bulb to the wall, you can use the special plaque. page 7

www.climma.it