|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
COMPACT and SPLIT QUATTRO models
|
|
|
|
|
|
|
|
3 INSTALLATION O F THE COMPONENTS
|
|
|
|
|
|
|
|
3.1 - FUNCTIONING OF THE AIR-CONDITIONERS
During the cooling cycle, the réfrigérant circuit takes the ambient air away and to make it over the sea water (CO models). It is possible to select the functioning cycle, the desired temperature and the fan speed from a remote control panel for boat that can be installed in the air-conditioned room. For the specific distances, refer to the directions of the remote control panel (page 149).
|
|
|
|
|
|
|
|
|
Version with standard mechanical panel
|
|
|
|
|
|
|
|
3.2 - ARRANGEMENT - General notes
|
|
|
|
|
|
|
|
Choosing the unit position, it is necessary to consider the following elements:
1 - the accessibility to the air filter for the cleaning;
2 - the necessary space for the fastening of the provided clamps (figure 1.8 - page 8);
3 - the connection of the condensation drainpipes (figure 2.8 - page 8);
4 - since the fan rotates, it is necessary to choose the best position to connect it to the air duct. Then, block the fan in the chosen position;
5 - the passing of the sea water circuit pipes;
6 - the passing of the electrical connection wires and the easy access to the electrical box.
Position the pipe-tightening clamps of the water system so that once arranged the unit, it is possible to tighten the screws. Instead of the clamps we suggest to use all stainless steel components.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|