SVM 2S
2Pages

{{requestButtons}}

Catalog excerpts

SVM 2S - 1

Vacmobile SVM 2S series Modular, single vacuum pump, single resin trap system for infusion The Vacmobile SVM 2S series is a modular system for manufacturing composites using vacuum processes such as resin infusion and vacuum bagging. The series is based on a mobile docking cart which will accommodate a single vacuum pump and a single resin trap. The bottom level of the cart will accommodate a range of vacuum pumps up to 28 m3/h in capacity with 50 Hz power, or 33.6 m3/h with 230 V/60 Hz power (presently limited to 12.7 cfm with 115 V/60 Hz power). While there are a number of resin trap options for the upper level of the cart, the resin catching capacity is always limited to 12 litres (3.1 US gallons). When infusing large parts, the resin trap (complete with vacuum controls) may be removed from the docking station and remote mounted. Although we recommend having access to at least 2 vacuum systems when infusing resin into large and high value composites, the largest pump capacity SVM 2S machines may be used to infuse up to approximately 200 m2 (2,150 ft2) of laminate, as long as the resin overflow from the laminate can be limited to less than 12 litres (3.1 US gallons). If this is insufficient resin capacity, the machine’s resin trap may be used as a manifold for up to 8 supplementary resin traps. Typical SVM 2S modular components Assembled SVM 2S system Modules slide and lock into place without tools! Mobile and easily transported – use anywhere! Vacuum pumps (230V) PVR EM 12/B. 50 Hz capacity 12.5 m³/h (7.4 cfm). 60 Hz capacity 15 m³/h (8.8 cfm) PVR EM 20/B. 50 Hz capacity 18 m³/h (10.6 cfm). 60 Hz capacity 21.6 m³/h (12.7 cfm) PVR EM 28/B. 50 Hz capacity 28 m³/h (16.5 cfm). 60 Hz capacity 33.6 m³/h (19.8 cfm) Vacuum pump (115 V) Becker U4.20. 60 Hz capacity 21.6 m³/h (12.7 cfm) Vacuum level Adjustable from approximately 20% vacuum to the pump’s maximum vacuum, as follows: PVR EM12/B 20 mbar, 98% vacuum, 15 Torr, 29.3” Hg, -14.4 psi, -99.3 kPa. PVR EM20/B 10 mbar, 99% vacuum, 8 Torr, 29.6” Hg, -14.55 psi, -100.3 kPa. PVR EM28/B 20 mbar, 98% vacuum, 15 Torr, 29.3” Hg, -14.4 psi, -99.3 kPa. Becker U4.20 10 mbar, 99% vacuum, 8 Torr, 29.6” Hg, -14.55 psi, -100.3 kPa. P1 of 2

Open the catalog to page 1
SVM 2S - 2

Vacmobile SVM 2S series Modular, single vacuum pump, single resin trap system for infusion 0 Resin catch pot 12 litres (3.1 US gallons). Heat resistant to 220 C (4300F). Trap lid connections Up to 8 connections in 4 optional sizes to suit the following outside diameter extruded tubes: 3/8” to 10 mm, 1/2” to 13 mm, 5/8” to 16 mm, or 19 mm to 3/4”. With adaptors, also suitable for 1/2” and 3/4” inside diameter tubing. On all standard tubing sizes, high integrity vacuum connections are quickly and reliably achieved at the trap lid via O-ring seals on the outside of the tube. Trap lid options...

Open the catalog to page 2

All Vacmobiles catalogs and brochures

  1. 2S HD

    2 Pages

  2. HRTS

    2 Pages

  3. Accessories

    2 Pages

  4. Consumables

    1 Pages

  5. MODULAR 4S

    2 Pages

  6. 20/2 System

    2 Pages

  7. Instruments

    1 Pages

Archived catalogs

  1. Accessories

    2 Pages