20/2 System - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

20 m /h pump capacity 2 litre catchpot 3 For Resin Infusion | RTM Light | Vacuum Bagging | Double Bag Infusion Mobile vacuum system with integrated resin trap The original Vacmobile, the 20/2 mobile vacuum system is a proven performer ideally suited to resin infusion or vacuum bagging composite parts, where the resin overflow from the part will be less than 2 litres (4 pints). Don’t be fooled by its compact size – the Vacmobile 20/2 can successfully resin infuse vacuum bagged products as large as 185 m² (2,000 ft²) when supplemented by a larger (optional) resin trap. The Vacmobile 20/2 arrives ready to run on single phase power, so there’s no costly installation or complicated set up. Exceptionally mobile, the Vacmobile 20/2 allows you to get much closer to your work, where the vacuum is needed the most, which means greater performance and lower operating costs. Collapsed down for transport The Vacmobile 20/2 vacuum system arrives complete with an integrated resin trap, vacuum gauge, vacuum regulation, coarse particle filter and motor overload protection. It is robustly constructed from proven Vacmobile components, including our unique O-ring sealed trap lid tubing connections, assuring vacuum integrity over a long working life. Very versatile: Single & Dual vacuum levels The Vacmobile 20/2 has an optional Dual-Vac accessory that seamlessly converts the standard single vacuum level 20/2 into a dual vacuum machine suitable for small RTM Light and double bag infusion processing. This added scope is ideal for laboratories and training facilities where a range of processes need to be demonstrated, or for small manufacturers who are focussed mostly on infusion projects, but occasionally need the ability to undertake Light RTM jobs. Collapsible for transporting The Vacmobile 20/2’s normal working height of 1065 mm (42”) can be easily reduced to 620 mm (24.4”) making it simple to move between working locations. Ruggedness proven in more than 50 countries since 2006 1 Silenced vacuum regulation valve 2 Instant vacuum release button 3 Vacuum tubing restraint. Holds tubing from resin trap horizontally or vertically, as required 4 Valves mechanically locked to manifold. Cannot loosen or leak 5 Manifold machined from solid aluminium block 6 Manifold physically locked to main handle of machine. Cannot loosen in service 7 O-ring sealed connection to resin trap 8 Convenient working height handle and manifold. Can be compacted down for transport

 Open the catalogue to page 1

Vacmobile 20/2 For Resin Infusion | RTM Light | Vacuum Bagging | Double Bag Infusion 20 m3/h pump capacity 2 litre catchpot Specifications Vacuum pump Becker U4.20 or PVR EM 20/B, (PVR EM20 for special high vacuum applications) 50 Hz capacity 18 m³/h (10.6 cfm). 60 Hz capacity 21.6 m³/h (12.7 cfm). Power supply Either 230 V, 50/60 Hz or 110 V, 60 Hz, single phase. Vacuum level Adjustable from approximately 20% vacuum to the pump’s maximum vacuum: 10 mbar, 99% vacuum, 8 Torr, 29.6” Hg, -14.55 psi, -100.3 kPa. (Higher vacuum capabilities to special order). 2 litres (4.2 US pints). Resin trapping...

 Open the catalogue to page 2

All Vacmobiles catalogues and brochures

  1. Accessories

    2 Pages

    En
  2. Consumables

    1 Pages

    En
  3. RT19 Resin Trap

    4 Pages

    En
  4. RT2 Resin Trap

    2 Pages

    En
  5. MODULAR 4S

    2 Pages

    En
  6. MICRO 8/2 System

    2 Pages

    En
  7. Pressure gauges

    1 Pages

    En
  8. SVM 2S

    2 Pages

    En
  9. Accessories

    2 Pages

    En
  10. Instruments

    1 Pages

    En
  11. Vacmobile Micro

    1 Pages

    En
  12. Gland Fittings

    2 Pages

    En