Catalogues - engine-control-cables

Catalogue ENGINE CONTROL CABLES

www.ultraflexgroup.it

Page

/ 3

Contact the
Manufacturer

Where to buy
this product ?

/ 3

See other catalogues for Ultraflex

Text version of the page


	„»-—--*—H-T-	07
ENGINE CONTROL CABLES	LZ i°-* ¹-10-32 UNF		10-32 UNF-J
C2 Stroke: 87 mm (3.4") For use with inboard, sterndrive and outboard engines with appropriate		07	*-"-'-»-■-.ft-**
accessories.	C7 f---- ' l-10-32 UNF	8x32-	■ n 10-32 UNF---¹
C7 Stroke: 87 mm (3.4") For inboard and outboard engines, with appropriate accessories.		0 8.5	t.-=:-^
C8 Stroke: 87 mm (3.4") For inboard, sterndrive, outboard engines, with appropriate accessories.	C8 —10-32 UNF	¹ i-fbm	*—■r 10-32 UNF-^**
CZero Stroke: 87 mm (3.4") For inboard outboards, inboards and		07 \|-r-- =f-1^=~-
outboards. Ideal for high performance applications and long cable runs and complex	CZerO "j^— 10-32 UNF		--^-4fc 10-32 UNF—¹

ENGINE CONTROL CABLES

HOW TO MEASURE FOR CONTROL CABLE INSTALLATION_

FOR NEW INSTALLATION, measure A + B distance from the control along an unobstructed cable routing to clutch and / or throttle connection.

Round this dimension off to the next whole foot: you will have your cable length. We recommend that the cable bends have a minimum radius of about 8" (200 mm). For outboard engine installations, it is necessary to add three feet to the obtained length, in order to allow the engine movement.

To determine the needed length of the REPLACEMENT CABLE, measure it from tip to tip.

When ordering, specify the cable length in feet, rounding the dimension off to the next whole value.

If any kit is required to complete the cable connection, consult the appropriate section in this catalogue.

C4 Stroke: 80 mm (3.1")

For Johnson®, Evinrude®, OMC® engines manufactured before 1979.

C14 Stroke: 75 mm (3")

For Johnson®, Evinrude®, OMC® engines manufactured after 1979.

C36 Stroke: 85 mm (3.3")

For Mercury® and Mercruiser® engines and Mercury® Generation II™ series controls.

C5 Stroke: 95 mm (3.75")

For Mercury® and Mercruiser® engines and 1993 to date Force Mariner.

C16 Stroke: 80 mm (3.1")

For Mariner^ engines up to 37 kW (50hp).

C22 Stroke: 80 mm (3.1")

Stainless steel clamp fittings. Recommended for heavy duty applications.

B14 Stroke: 70 mm (2.8")

Designed for throttle, fuel shut-off and other applications. Supplied with L13 and L14 clamp and shim.


SELECTION OF EIVGIIVE CONTROL CABLE

ENGINE		ULTRAFLEX ENGINE CONTROL CABLE
		ULTRAFLEX ENGINE CONTROL CABLE
	Mercury® and Gen. II™ Controls	C36
	Mercury® Mariner® over 50 hp (37Kw)	C5
	Mariner® up to 50 hp (37Kw)
OUTBOARD	Force® Selva® Yamaha® Suzuki® Tohatsu® Honda® Nissan®	C2 - C8 - CZero
	Johnson® - Evinrude®	pre 1979 C4 after 1979 C14
	Mercury® and Gen. II™ Controls	C36
	Mercruiser®	Cf>
STERNDRIVE	OMC®	pre 1979 C4 after 1979 C14
	Volvo Penta®	C2 - C8 - CZero - C22
INBOARD		C2 - C8 - CZero - C22

MERCURY® - MERCRUISER® - MARINER®

C36

^rlll