Catalogues - electromechanical-hatch-lifters

Catalogue ELECTROMECHANICAL HATCH LIFTERS

www.ultraflexgroup.it

Page

/ 3

Where to buy
this product ?

/ 3

See other catalogues for Ultraflex

Text version of the page

Switch (optional)

AV Actuator

AV HAILH

LIFTERS

Relay Box (optional)

Battery (not supplied)

Battery

(not supplied)

Fig. 1

Fig. 2

INSTALLATION

• The following equation will help you to calculate the maximum strength (Fmax) required from the hatch lifter to open your hatch, knowing the dimensions and weight of the hatch and the position of the mounting brackets.

p d l Fmax = -=- x -r- x — 2 b a

P = weight of the hatch in Newton

c, a, b = dimensions in metres indicated in

Fig. 3 and Fig. 4

L = hatch lifter length when in closed position

Warning: Maximum load (Fmax) for the AV actuator in single installation: 1200 N, in dual installation: 2400 N.

NOTE: WHEN THE LOAD EXCEEDS 2400 N (240 kg - 530 lbs.) IT IS POSSIBLE TO INSTALL MORE THAN TWO AV ACTUATORS.

COMPONENTS DESCRIPTION AV Hatch Lifter

• n° 1 AV actuator for single installation (Fig.1); n° 2 AV actuators for dual installation (Fig.2)

• External diameter: 48 mm (1.9 inches)

• Length in the closed position: 377 mm (14.8 inches) + stroke

• Maximum oscillation range: 125°

Voltage supply cable:

• AV actuator is supplied with 1.5 m (5 ft) of cable.

• Warning: in case of longer cable length required, do not substitute the existing boat harness, but make a junction following the instructions supplied with the product.

Relay Box: 12-24V (optional)

Two way push-button with central off position (optional)

Fuse

Battery (not supplied)

Fig. 3

Fig. 4