M/V “NORMAND SEVEN” Offshore Construction Vessel VS 4220 OCV Hull no. 277 Delivery 2007 by Ulstein Verft AS, Norway Built for Solstad Shipping, Norway Chartered by: Subsea Seven M/S ”Normand Seven” is built as an Offshore Construction Vessel with large capacities. The Vessel able to is undertake all aspects of offshore construction and installation works. The Vessel is built for world-wide sub-sea operations including operation in coastal waters of any state. The vessel is designed with emphasis on efficiency, safety and economy. Considerations have been taken to minimize environmental pollution. Main Activities • Flexi Pipe Installation Laying • Construction, Maintenance and Installation Capabilities using Crane • ROV support (side loading to both sides) • Subsea Maintenance and Installation work • Umbilical Pipe Laying (preparation only) M/V ”Normand Seven” is arranged with diesel electric machinery with six diesel engines divided between two separate engine rooms. The main thrusters and side thrusters configuration is arranged for station keeping of the vessel under rough weather conditions. M/V ”Normand Seven” is built and painted (tanks and exterior) in dry dock inside covered dock hall, thus ensuring controllable atmosphere and the best quality of work. Shipbuilding by Ulstein Verft AS: Ulstein builds sophisticated vessels with a strong focus on innovative technological solutions and methods

TECHNICAL DATA MAIN DIMENSIONS Length over all Length between p.p. Breadth moulded Depth to 1st deck Draught scantling C A PA C I T I E S Heavy Fuel oil (IF40) 2414 m3 Fresh water 901 m3 Ballast water 6924 m3 Marine Diesel Oil 702 m3 HFO / MDO dual purpose 452 m3 Hydraulic oil 181 m3 Lubricating Oil 76 m3 Deck strength 10 t/m2 Deadweight at d=8,7 m 14180 ton Deck cargo capacity 5 m above base line 5150 ton Cargo deck area 2000 m2 Gross tonnage, international 14145 GT C L A S S I F I C AT I O N / F L AG DnV 1A1, SF, E0, DynPos AUTRO, E0, CLEAN DESIGN, COMF-V(3), HELDK-SH, SF, ICE C, CRANE, DK(+),...