Hydro Fenders - 12 Pages
PNEUMATIC FENDERS
Size | Fender body (kg) | Chain net (kg) | Total (kg) | Chain (mm) | |
300 X 500 | 10 | 10 | 10 | ||
300 X 600 | 15 | 15 | 10 | ||
500 X 800 | 25 | 25 | 13 | ||
500 X1000 | 35 | 35 | 13 | ||
800 X1200 | 75 | 100 | 175 | 16 | |
800 X1500 | 95 | 110 | 205 | 16 | |
1000 X1500 | 140 | 170 | 310 | 16 | |
1000 X 2000 | 170 | 200 | 370 | 16 | |
1200 X1800 | 180 | 210 | 390 | 18 | |
1200 X 2000 | 200 | 220 | 420 | 18 | |
1350 X 2500 | 270 | 260 | 530 | 20 | |
1500 X 2500 | 300 | 400 | 700 | 22 | |
1500 X 3000 | 350 | 440 | 790 | 22 | |
2000 X 3000 | 550 | 880 | 1430 | 26 | |
2000 X 3500 | 650 | 920 | 1570 | 28 | |
2000 X 6000 | 950 | 1120 | 2170 | 32 | |
2500 X 4000 | P | 1100 | 1510 | 2610 | 32 |
2500 X 5500 | P | 1350 | 1620 | 2970 | 36 |
3000 X 5000 | P | 1700 | 2620 | 4320 | 38 |
3300 X 4500 | P | 1800 | 2360 | 4160 | 38 |
3300 X 6500 | P | 2250 | 3120 | 5370 | 44 |
3300 X10500 | P | 2800 | 4050 | 6850 | 48 |
4500 X 7000 | P | 3250 | 5100 | 8350 | 50 |
4500 X 9000 | P | 4950 | 6200 | 11150 | 50 |
Hook type
Chain-tyre net (CTN) type
P = Pressure Relief Valve fitted as standard.
For other sizes, please contact Trelleborg Marine Systems sales offices.
Installation dimensions
Pneumatic fenders must be installed onto a solid structure or reaction panel to ensure
that they are properly supported during impacts.
Size | a | b | c | d | e | w |
1000 X1500 | 975 | 950 | 1350 | 200 | 375 | 2000 |
1200 X 2000 | 1200 | 1140 | 1620 | 220 | 430 | 2600 |
1500 X 2500 | 1525 | 1420 | 2050 | 250 | 525 | 3250 |
2000 X 3500 | 2050 | 1900 | 2700 | 300 | 650 | 4500 |
2500 X 4000 | 2490 | 2380 | 3380 | 450 | 890 | 5200 |
3300 X 6500 | 3380 | 3140 | 4460 | 500 | 1080 | 8500 |
[Units: mm]
c 0b
0_
0Q C|
C r-
HHWL
tidal range
Standard manufacturing and performance tolerances apply (see pages 12-36 to 12-39)
M1100-S04-V1-3-EN. © Trelleborg AB, 2011
w
TRELLEBORG
-
P. 1
Pneumatic and Rolling Fenders TRELLEBORG Section Trelleborg Marine Systems www.trelleborg.com/marine Pneumatic Hydropneumatic Wheel... -
P. 2
PNEUMATIC FENDERS Pneumatic fenders are ideal for permanent and semi-permanent port applications and for offshore ship-to-ship transfers.... -
P. 3
-
P. 4
PNEUMATIC FENDERS Initial Pressure >50kPA=0.5kgf/cm2 (7.1psi)80kPA=0.8kgf/cm2 (11.4psi)SizeEnergy(kNm)Reaction(kN)Pressure(kN/m2)Energy(kNm)Reaction(kN)Pressure(kN/m2)500... -
P. 5
HYDRO- PNEUMATIC FENDERS Submarines and other vessels which contact fenders below waterline require a unique solution. Hydro- pneumatic... -
P. 6
WHEEL FENDERS Wheel fenders are widely used on exposed corners to help ships manoeuvre into berths and narrow channels such as locks and... -
P. 7
4–7WHEEL FENDERSThe table indicates typical wheel fender casing dimensions. For special applications and unusual corners, the casingshape can be... -
P. 8
4-8 ROLLER FENDERS Roller Fenders are usually installed to guide ships in restricted spaces like walls of dry docks. They can also be... -
P. 9
-
P. 10
