Raising the Mast Position the boat head to wind, away from any overhead power lines or other obstructions.Lay the mast along the centre line of the boat.Un-tape all the ropes attached to the foot of mast. 1Attach shroud adjusters to the shroud eye each side - approximately the 5th hole down. Subsequently, you can attach at the captive pin on the base of the plate.2Fix the base of the mast to the mast step on the cross beam with the pin and ring from the mast step. Ensure all Halyards are in place at foot of mast.3You may now pull the rig up using the forestay. You may require someone tohelp marine lift the top of the mast. 1