Fine and abrasive anti-skid recommended for heavy pedestrian traffic. Anti-slip and ground Safety Solutions COMPOSITION: Polyurethane elastomer complex covered with a very high performance anti-slip powder, on an anilox adhesive film. THICKNESS: 1.1 mm. SURFACE: hard particle powder, 100 - 500 microns. WEIGHT: 800 g/m2. TEMPERATURE HOLDING: -30°C to + 80°C. LAYING : AT3 adhesive MAINTENANCE : Regular washing with water and conventional detergents. In factory and workshop, it is recommended to use industrial detergents pH 9 and biodegradable. STORAGE: in the original packaging, away from humidity. Handle at a temperature between +5°C and +30°C. ANTI-SLIP TO STICK OR ADHESIVE TBSAFE 21 TBSAFE 20S RAMPE AMOVIBLE ANTI-SLIP ADHESIVE SPEED GRIP TBSAFE 21 AE1 TBSAFE 19 TBSAFE 16 TBSAFE 11R TBSAFE 10 PERFORMANCE TESTING* Slip resistance SRT test according to EN 13036-4: 1.05 on dry ground, 0.80 on wet ground. Test according to DIN 51 130: R13 classification (BGR181). APPLICATIONS : . Stair nosing . Aerial work platforms . Step stool . Longerons for utility vehicles . Tractors . Forklift trucks . Access ramps for the disabled . Construction equipment Fire and smoke resistance Test according to the order of November 21, 2002: M1. Other resistances To deformation: 4% elongation before breaking (breaking stress: 8.3 MPa). To UV, natural chemical agents, oils, greases, hydrocarbons, salt water, abrasion and to shocks. FORMATS STRIP self-adhesive BLISTERS self-adhesive pre-packaged ROLLER self-adhesive PLATE self-adhesive Aquascop ecotoxicity test Measures environmental toxicity in aqueous media. GINGER CEBTP CEREMA LNE Tests performed by the following national Loratories: 1 rue du Coteau Moreau, 49290 Chalonnes-sur-Loire, FRANCE - Tél. +33 (0)2 44 10 85 29 - [email protected] - www.proople.