All Taylor Machine Works catalogues and brochures

P. 1

loaded container handlersTaylor machine works, inc.Featured TruckTXLC-976TXLC-974TXLC-975TXLC-976Rated Capacity At 97-in. (2,464 mm) LC90,000-lbs. (40,824 kg) / 2-high Stacking85,000-lbs. (38,556 kg) / 3 and 4-high StackingRated Capacity At 106-in. (2,692...

P. 2

We engineer and build what you need.Taylor Machine Works was built on the premise, "We engineerand build what you need." This is just as true today as it wasin 1927. Taylor Machine Works can design, engineer, andmanufacture equipment tailored specifically...

P. 3

Loaded container handlerTaylor Machine Works' line of loaded container handlers continue with the introduction ofthe TXLC Series Loaded Container Handlers. The TXLC Series loaded container handlersanswer the call for more stable platform by anchoring...

P. 4

CANbus TechnologyAll machine controls are integrated using solid state controllers and J1939 CANbustechnology. This allows controllers and sensors to communicate with minimal wiringbetween the components. I/O modules are used to eliminate electromechanical...

P. 5

Loaded container handlerCoolingCharge Air, Transmission, EngineClog resistant, wide fin spacingHigh efficiency aluminum coreHydraulicHigher capacityHydraulic oil coolerGear pumpsRims & Tires4, 5, and 6 high standard 18.00 x 25Drive AxleHigh stability,...

P. 1

EMPTY CONTAINER HANDLERS TEC-l 5DH THRU TECTS-1 9B/9 WITH A TAYLOR EMPTY CONTAINER HANDLER... THE SKY IS THE LIMIT.

P. 2

Taylor Machine Works has designed, built, and marketed empty-container handlers since 1976."Big Red" empty handlers reflect the experience and knowledge gained during those years.Taylor empty handlers are "All American," designed andbuilt in the USA....

P. 3

Dependability - Power - Safety - Controlthese are the things you expect and Taylor Machine Works delivers.Taylor's empty container handlers are equipped with a wide assortmentof masts and attachments to better meet your particular need.TEC-150H•••••15,000-lbs...

P. 4

Taylor Empty Container Handlers are all you need to handle the job... you can depend on it.Drive Train___________________________________ ___Each model uses a Tier Compliant Cummins® electronic turbocharged,charged air aftercooled (air to air) diesel...

P. 5

Dependability - Power - Safety - Controlthese are the things you expect and Taylor Machine Works delivers.Tilt steeringAnti-restart ignitionFully adjustablevinyl seatSimple, smooth andprecise joystick controlsThe cab features a verycomfortable and safe...

P. 1

Removable Counterweight36 or 48-in. Load Center MachinesTaylor machine works, inc.TX-550RC Model and Capacities55,000-lbs (25,000 kg) at 36-in (915 mm) Load Center48,000-lbs (21,800 kg) at 48-in (1,220 mm) Load Center144-in. (3,683 mm) Wheelbase30,000-lbs...

P. 2

Taylor Machine Works was built on the premise, "We engineer and build what you need."This is just as true today as it was in 1927. We can design, engineer, and manufactureequipment tailored specifically to meet the material handling needs of your business.Taylor...

P. 3

36 or 48-in. Load Center MachinesThe TX-550RC features the most dependable mast and carriagein its class. Known for their innovative design, this mast andcarriage gives you the confidence in knowing it will work everytime you need it. Even when maintenance...

P. 4

Engine mounted sealedfan shroud insuresmaximum air flowCooling includes:• engine charge air cooler• engine coolant air cooler• transmission oil air cooler• separate wet disc andhydraulic oil air cooler.High-output pusher fanENGINE•...

P. 5

36 or 48-in. Load Center MachinesThe TX-550RC line of industrial pneumatic lift trucks are designedand engineered with the operator and service personnel in mind.Each TX-550RC lift truck uses a Tier Certified Cummins® electronic turbocharged, charge...

P. 1

Rigger Truck36-in. Load Center MachineTaylor machine works, inc.TX-4030*TX-4030 CapacitiesTX-4030TX-4030(36,000-lb. Cap. at 36" L.C., 132" WB)Rigger Application:(40,000-lb. Cap. at 36" L.C., 132" WB)[if traveling less than 1 mph up to 48-in. lift.]ENGINEERING...

P. 2

Taylor Machine Works was built on the premise, "We engineer and build what you need."This is just as true today as it was in 1927. We design, engineer, and manufactureequipment tailored specifically to meet the material handling needs of your business.Taylor...

P. 3

36-in. Load Center riggerThe TX Series features the most dependable and diverseassortment of mast and carriages in its class. Known for theirinnovative design, these masts give you the confidence in knowingit will work every time you need it. Even when...

P. 4

The TX Series line of industrial pneumatic lift trucks was designed and engineered with theoperator and service personnel in mind.Each model in the TX Series of lift trucks uses a Tier Certified Cummins® electronicturbocharged, charge air aftercooled...

P. 5

36-in. Load Center riggerHydraulic tank –• easily removable• heavy gauge steel wall• serviceable filter element• tank mounted breather• internal suction screen• 57-gallon capacityFull flow, in-tank, 10-Micronreturn...

P. 1

Articulated 4-Wheel Drive24-in. Load Center ForkliftTaylor machine works, inc.TX4-300*TX4 Articulated Forklift Models and CapacitiesTX4-250(25,000-lb. Cap. at 24” L.C., 132" WB)TX4-300(30,000-lb. Cap. at 24" L.C., 132" WB)TX4-360(36,000-lb. Cap....

P. 2

Taylor Machine Works was built on the premise, "We engineer and build what you need."This is just as true today as it was in 1927. We design, engineer, and manufactureequipment tailored specifically to meet the material handling needs of your business.Unlike...

P. 3

24-in. Load Center MachinesThe TX Series features the most dependable and diverseassortment of mast and carriages in its class. Known for theirinnovative design, these masts give you the confidence inknowing it will work every time you need it. Even whenmaintenance...

P. 4

The TX4 Series of articulated 4-wheel drive forklifts were specifically designedfor one task... moving material in the harshest environments imaginable. Nomatter if it’s snow, mud, or rough terrain - the TX4 delivers unparalleledperformance.Designed...

P. 5

24-in. Load Center MachinesEngine mountedsealed fan shroudinsures maximumair flowFuel tank –• heavy gauge steel wall• lockable fuel cap• integral strainer• 50-gallon capacityFuel sensor has no moving partsHigh performancepusher...

P. 1

PRODUCT LINEWHEELBASE & CAPACITIESTXB-180S (18,000-lb. Cap. at 24" L.C., 110" WB)TXB-200S (20,000-lb. Cap. at 24" L.C., 110" WB)TXB-250M (25,000-lb. Cap. at 24" L.C., 121" WB)TXB-300L (30,000-lb. Cap. at 24" L.C., 140" WB)††Truck is shown...

P. 2

All welded steel chassisdesign for superior strengthWidth Over Tires99-in. – TXB-180S – TXB-200S109.5-in. – TXB-250M110.5-in. – TXB-300LFrame ChannelsFor clean and protected routingof wiring and hoses

P. 3

Counterweight sections are sloped toprovide increased visibility for theoperatorA-frame is taller toaccommodate the taller cabfor operator comfortTilt hoses are hiddeninside A-frame channelHydraulic tank –heavy gauge steel wallserviceable filter...

P. 4

Transmission output shaft, discmounted, parking brakeSpring on – Hydraulic offInstrument panel mounted controlHeavy-duty bolted planetarydrive axle3 planetary pin, force-cooled wet disc brakesHydraulic activated, brake saver system does not allowoperator...

P. 5

ENGINE• Tier Certified Cummins electronic, low emissions(see specification sheet for engine detail)• Lower fan speed and engine speed for less noise• Electronic diagnostics on engine with fault code history foreasy diagnostics and repair•...

P. 1

48-in. Load Center MachinesTaylor machine works, inc.TXH-370M*TXH Series Models and CapacitiesTXH-300L (30,000-lb. Cap. at 48" L.C., 148" WB)TXH-300KS (30,000-lb. Cap. at 48" L.C., 148" WB)TXH-350L (35,000-lb. Cap. at 48" L.C., 148" WB)TXH-350KS (35,000-lb....

P. 2

Taylor Machine Works was built on the premise, "We engineer and build what you need."This is just as true today as it was in 1927. We can design, engineer, and manufactureequipment tailored specifically to meet the material handling needs of your business.Taylor...

P. 3

48-in. Load Center MachinesThe TXH Series features the most dependable and diverseassortment of mast and carriages in its class. Known for theirinnovative design, these masts give you the confidence inknowing it will work every time you need it. Even...

P. 4

The TXH Series 48-in. L.C. line of industrial pneumatic lift trucks was designed andengineered with the operator and service personnel in mind.Each model in the TXH Series of lift trucks uses a Tier Certified Cummins® electronicturbocharged, charge...

P. 5

48-in. Load Center Machines7-blade pusher fanHydraulic tank –• easily removable• heavy gauge steel wall• serviceable filter element• remote mounted breather• internal suction screen• 78-gallon capacityFull flow,...

P. 1

TX-520M* TX Series Models and Capacities TX-400M TX-450M TX-450S TX-520S TX-550S (40,000-lb. Cap. at 36" L.C (45,000-lb. Cap. at 36" L.C (45,000-lb. Cap. at 36" L.C (52,000-lb. Cap. at 36" L.C (55,000-lb. Cap. at 36" L.C 156"...

P. 2

Taylor Machine Works was built on the premise, "We engineer and build what you need." This is just as true today as it was in 1927. We design, engineer, and manufacture equipment tailored specifically to meet the material handling needs of your...

P. 3

The TX Series features the most dependable and diverse assortment of mast and carriages in its class. Known for their innovative design, these masts give you the confidence in knowing it will work every time you need it. Even when maintenance...

P. 4

The TX Series of 36-in. & 48-in. L.C. line of industrial pneumatic lift trucks was designedand engineered with the operator and service personnel in mind.Each model in the TX Series of lift trucks uses a Tier Certified Cummins® electronicturbocharged,...

P. 5

M. !_□ AD CENTER MACHINES Hydraulic tank - easily removable heavy gauge steel wall serviceable filter element tank mounted breather internal suction screen 82-gallon capacity (TX-400S thru TX-550M) 114-gallon capacity (TX-650S...

P. 1

24-in. Load Center MachinesTaylor machine works, inc.TX-360M*TX Series Models and CapacitiesTX-160(16,000-lb. Cap. at 24" L.C., 97" WB)TX-175(17,500-lb. Cap. at 24" L.C., 97" WB)TX-180S(18,000-lb. Cap. at 24" L.C., 101" WB)TX-200S(20,000-lb. Cap. at 24"...

P. 2

Taylor Machine Works was built on the premise, "We engineer and build what you need."This is just as true today as it was in 1927. We can design, engineer, and manufactureequipment tailored specifically to meet the material handling needs of your business.Taylor...

P. 3

24-in. Load Center MachinesThe TX Series features the most dependable and diverseassortment of mast and carriages in its class. Known for theirinnovative design, these masts give you the confidence inknowing it will work every time you need it. Even whenmaintenance...

P. 4

The TX Series 24-in. L.C. line of industrial pneumatic lift trucks was designed andengineered with the operator and service personnel in mind.Each model in the TX Series of lift trucks uses a Tier Certified Cummins® electronicturbocharged, charge...

P. 5

24-in. Load Center MachinesHydraulic tank –• easily removable• heavy gauge steel wall• serviceable filter element• remote mounted breather• internal suction screen• 25-gallon capacity(TX160 – TX175)•35-gallon...

P. 1

TAYLOR FACTS ANO FEATURES TS TS-1068 TAYLOR STACKER ENGINE • Tier compliant Cummins electronic, low emissions • Floor boards and cab insulation standard • Muffler inboard with vertical stack for improved...

P. 2

TA VI f\0 Mare FACTS ANO FEATURES I *M LUnTS Series TAYLOR STACKER TS-1068 CHASSIS AND HYDRAULICS • 275-in. short wheelbase allows close maneuvering • All welded steel chassis • Large 210-gallon capacity, heavy...

P. 1

; :l \ 'pi /A RS SERIE EACH STACKERS Loaded Container Handler Models: RS-9972C / RS-9977C / RS-9977R

P. 2

RS Series Reach Stacker RS-9972C / RS-9977C / RS-9977R I- • Cummins Tier compliant electronic 4-cycle turbocharged diesel • 4-speed fully reversing, modulated, Powershift transmission • Rugged all-welded chassis and frame •...

P. 3

Attachment The telescopic boom is high strength steel. The expandable attachment has standard ISO twistlocks for 20-ft. (6.1 m) and 40-ft. (12.2m) positions. The hydraulic motor and gear reduction system permit clock-wise and counter- clock-wise...

P. 4

After Market ort "You Can Depend On Big Rea" is a personal and collective commitment from the Taylor "Big Red" Team to every customer. Customer needs and expectations are priorities for Taylor engineering, manufacturing, marketing, and...

P. 1

Empty Container Handlers TECSP-155HD Rated Capacity 15,000-1 bs. for 5-High 9'6" Stacking and 6-High 8'6" Stacking (180-in wheelbase) TECSP-157/8 Rated Capacity 15,000-lbs for 9.5-ft High Containers for 7-High Stacking (1S0-in wheelbase) TECSP-157/8...

P. 2

Taylor Empty Side Post Container Handler Series TECSP-155HD and TECSP-157/8 • Tier Compliant Cummins Electronic Turbocharged, Charge-Air-Cooled Diesel Engine • Three speed fully reversing, modulated, powershift transmission...

P. 3

Operator Station Economically designed to provide maximum comfort and ease of control for the operator. Rear, center mount, two-door ele- vated operator cab is shock mounted with excellent visibility through mast, forward and rear, meeting...

P. 4

After Market Support "You Can Depend On Big Red" is a personal and collective commitment from the Taylor "Big Red" Team to every customer. Customer needs and expectations are priorities for Taylor engineering, manufacturing, marketing, and service...

P. 1

®Loaded Container HandlersTHDC-974 at 97-in Load CenterRated Capacity 90,000-lbs. at 2-High StackingRated Capacity 85,000-lbs. at 3 & 4-High Stacking106-in Load Center / Rated Capacity 82,000-lbs. at 2-High StackingRated Capacity 80,000-lbs....

P. 2

Taylor Loaded Container Handler Series i- TH DC and THDCP-974 /975 • Tier compliant Cummins turbo-charged engine • Three speed fully reversing, modulated, powershift transmission with declutch and electric shift control •...

P. 3

Operator Station Economically designed to provide maximum comfort and ease of control for the operator. Center mount, two-door elevated operator cab is shock mounted with excellent visibility through mast, forward and rear, meeting proposed...

P. 4

After Market Support "You Can Depend On Big Red" is a personal and collective commitment from the Taylor "Big Red" Team to every customer. Customer needs and expectations are priorities for Taylor engineering, manufacturing, marketing, and...

P. 1

®TMH Admiral Series Marina Lifts

P. 2

Taylor "Big Red" TMH Admiral Series Marina Handlers Marina lifts specifically designed for the marina industry... not industrial lifts adapted for marinas! Working in close consultation with the professionals of the marina industry, the...

P. 3

INCREASED PRODUCTIVITY Rugged-Proven Powertrain A standard 6-cylinder, 359-cu-in, 160 horsepower turbocharged diesel engine or an optional 139 HP LPG engine is available- a rugged three-speed, fully reversing, modulated powershift trans- mission...

P. 4

After Market Support "You Can Depend On Big Red" is a personal and collective commitment from the Taylor "Big Red" Team to every customer. Customer needs and expectations are priorities for Taylor engi- neering, manufacturing, marketing, and...

P. 1

®T-Series36-in. and 48-in. Load Center Lift Trucks

P. 2

Taylor T-360S through T-700L Series Industrial Trucks with the lowest total operating cost in the industry. Tier II turbocharged diesel engines Heavy-duty 3-speed modulated powershift transmissions Rugged high-strength, all welded chassis...

P. 3

Operator Station All models certified to meet ANSI B56.1 FOPS operator protec- tion. Shock mounted, center mount operator station location standard; other optional positions available. Individual fingertip hydraulic remote controls for smooth,...

P. 4

After Market Support "You Can Depend On Big Red" is a personal and collective commitment from the Taylor "Big Red" Team to every customer. Customer needs and expectations are priorities for Taylor engineering, manufacturing, marketing, and...

P. 1

Excellence backed y Experience SERIES o PRODUCT LINE WHEELBASE & CAPACITIES TXH-300L (30,000-lb. Cap. at 48" L.C., 148" WB) TXH-350KS (30,000-lb. Cap. at 48" L.C., 148" WB) TXH-350L (35,000-lb. Cap. at 48" L.C., 148" WB) TXH-350KS...

P. 2

All welded steel chassisdesign for superior strengthWidth Over Tires103-in. – TXH-300 - TXH-350106.5-in. – TXH-400Frame ChannelsFor clean and protected routingof wiring and hoses

P. 3

Counterweight sections are sloped to A-frame is 7-inches taller to Tilt hoses are hidden provide increased visibility for the accommodate the taller cab inside A-frame channel operator for operator comfort Bolt-on...

P. 4

Transmission output shaft, disc mounted, parking brake Spring on - Hydraulic off Instrument panel mounted control Heavy-duty bolted planetary drive axle 6 planetary pin, force-cooled wet disc brskGs (TXH-400L has 3 planetary pins) Hydraulic...

P. 5

ENGINE • Tier Certified Cummins electronic, low emissions (see specification sheet for engine detail) • Lower fan speed and engine speed for less noise • Electronic diagnostics on engine with fault code history for easy...

P. 1

PRODUCT LINEWHEELBASE & CAPACITIESTX-180STX-200STX-220STX-250STX-250MTX-280STX-280MTX-300STX-300MTX-330STX-330MTX-360MTX-360L(18,000-lb. Cap. at 24" L.C., 101" WB)(20,000-lb. Cap. at 24" L.C., 101" WB)(22,000-lb. Cap. at 24" L.C., 101" WB)(25,000-lb....

P. 2

Overhead tilt cylindersAdjustable rod endsGreaseable self-aligning spherical bearingsBetter mast stabilizationTwo-stage telescopic mastNested channelsLift cylinders behind railsLift chains are hidden inside mast railsSame diameter tilt cylinders as inT-Series...

P. 3

ULTRA-VU Heavy-Duty Mast Standard 11 ft. Optional masts are available upon request Shown with standard carriage 1 ■ :m PII WW W h EÉ Shown with optional side shift/fork positioner carriage 2...

P. 4

Heavy-duty bolted planetary drive axle 6 planetary pin, force-cooled wet disc brakes Hydraulic activated, brake saver system does not allow operator to drive through parking brakes Din type rim mounting Transmission output shaft,...

P. 5

All models meet ANSI B56.1 FOPS operator protection One of the most spacious all steel cabs in the industry as well as great features Two doors with sliding glass Remote mounted under cab hourmeter One circulation fan Easily replaceable...

P. 1

THD-160 24-inch Load Center Forklifts THD-160 Rated Capacity 16,000-lbs.

P. 2

Taylor Tough THD-160 THD-160 16,000-lbs. capacity at 24-in. load center 92-in. wheelbase • Tier II Cummins B4.5T-C99 mechanical turbocharged diesel engine • Heavy-duty 3-speed fully reversing modulated power shift transmission •...

P. 3

Operator StationErgonomically designed to provide maximum comfort and easeof control for the operator. The spacious rubber mounted, centermounted operator station has removable floorboard panelswhich provide easy access to components. Cab is optional.Levers...

P. 4

After Market Support "You Can Depend On Big Red" is a personal and collective commitment from the Taylor "Big Red" Team to every customer. Customer needs and expectations are priorities for Taylor engineering, manufacturing, marketing, and...