3020 - 3 Pages

Add to MyNauticExpo favorites

Catalog excerpts

3020 DISPLAY The A+T 3020 is a new display engineered to the highest standards for the grand prix racing, superyacht and classic yacht markets. It is a direct replacement for a B&G 20/20, fitting into the same mounting and cut-out, but with much larger digits. It is compatible with existing B&G systems (H2000, H3000 & WTP) plus has future-proof interface and software design to allow for upgrades to new standards and systems. The highest attention has been paid to water integrity under the harshest conditions and the ability to withstand extremes of heat, sun and cold. Main Features • Very high contrast and clear digits 62mm high •    CNC milled from PA66 billet, chassis has no corrosion issues in carbon •    Fits into same cut-out, screw holes and wiring as existing B&G 20/20 displays, no boat building issues to install • Fully sealed, each unit tested underwater and to 70°C before shipping • Bluetooth link for software upgrades and diagnostics •    Two-way NMEA0183 interfacing •    Very fast display refresh rate (>25Hz) • LCD bonded to quality 3mm toughened glass to eliminate condensation clouding • Antiglare coated glass with no loss when using polarised sunglasses • Ethernet interface for future system upgrade 3020 Product Sheet VI .0 January 2017 ©A+T Instruments Ltd. 2017 A+T Instruments Ltd. 235 Bentley Way, Lymington, S041 8JW, UK +44(0)1590 718182 info@AandTinstruments.com www.AandTinstruments.com

 Open the catalog to page 1

3020 DISPLAY Environmental • IP68 and each unit tested fully immersed for 24 hours before shipping • Neoprene seal between back shell and main body allows for component level repairs • All CNC PA66 construction with wall thickness >2.5mm; no corrosion when mounted into carbon • Cable connection pigtail is hard wired into unit to keep profile low and eliminate issues with plugs and sockets in potentially exposed areas • Each strand of pigtail separately sealed in epoxy on entry to eliminate water wicking up the cable. Pigtail can be cut short to any length • Hermetically sealed and tested...

 Open the catalog to page 2

3020 DISPLAYComparison with B&G 20/20 Cable Options Pigtail for Direct Installation • 8 core lead, standard length 3m • Custom lengths available Cable with Connectors (IP68) • Allows units to be swopped out quickly • Display comes with short (170mm) lead and plug • Boat installation lead, standard length 3m, custom lengths available • This is permanently installed at j/b with self-sealing socket (so IP68) when not connected Warranty and support • 2 years warranty is offered on A+T products on return to factory basis • Warranty starts from earliest date first used or 1 year after leaving...

 Open the catalog to page 3

All A T Instruments Ltd catalogs and brochures

  1. SOV

    2 Pages

  2. PHD

    3 Pages

  3. MINI displays

    2 Pages

  4. BFD Display

    2 Pages

  5. MFD

    3 Pages