T-88 TDS - 3 Pages

System Three Resins, Inc.
3500 W. VALLEY HWY. N. SUITE 105
AUBURN, WASHINGTON 98001
TECHNICAL SUPPORT: 253-333-8118
www.systemthree.com
TECHNICAL DATA SHEET
T-88® Structural
Epoxy Adhesive
DESCRIPTION:
System Three T-88® is a 2-component, epoxy/polyamide adhesive. Mixed in a simple 1:1 ratio, it will form structural bonds to
many materials, including some kinds of plastics. Its medium viscosity and long working time makes it ideal for large or
complicated glue-ups. T-88 meets the specification requirements of MIL-A-81236(OS) and CID A-A-3053.
RESIN PROPERTIES:
HARDENER PROPERTIES:
Viscosity @ 25°C(77°F) ................................ 9000-11000 cps
Specific Gravity ........................................................ 1.10-1.12
Color ............................................................................... Clear
Viscosity @ 25°C(77° F) ............................... 8000-10000 cps
Specific Gravity ........................................................ 0.95-0.97
Color ............................................................................. Amber
MIXED SYSTEM PROPERTIES:
Mix ratio by weight resin/hardener ....................................................................................................................................... 100/83
Mix ratio by volume resin/hardener .................................................................................................................................... 100/100
Working time @ 25° C ............................................................................................................................................. 40-60 minutes
Tack-free time @ 25° C ................................................................................................................................................... 4-6 hours
Coverage .......................................................................................................................................................................... 80 ft2/gal
Maximum Service Temperature ............................................................................................................................................ 160°F
TYPICAL CURED PROPERTIES:
Lap-Shear Strength (psi) ASTM D1002
Polyester Laminate ...................................................................................................... 2800*
Aluminum ....................................................................................................................... 2000
Concrete ...................................................................................................................... 1100*
Galvanized Steel ............................................................................................................ 1800
Wood(Maple) ............................................................................................................... 1800*
Copper ........................................................................................................................... 1650
*Indicates substrate failure
Lap-Shear Strength vs. Temperature:
(Aluminum Tensile Shear):
67°F ......................................................................................................................... 2500 psi
75°F ......................................................................................................................... 2000 psi
150°F ....................................................................................................................... 1300 psi
180°F ....................................................................................................................... 1000 psi
Tensile Strength, psi ................................................................................................................................................................ 7000
Tensile Elongation at break .................................................................................................................................................... 7.5%
Flexural Strength, psi ........................................................................................................................................................... 11,500
Flexural Modulus, psi ......................................................................................................................................................... 375,000
Compressive Yield Strength, psi .......................................................................................................................................... 12,500
Heat Deflection Temperature, ° F ............................................................................................................................................. 119
All tests were conducted in accordance with ASTM procedures.
Sizes available(kits): 8 oz. / 16 oz. / 32 oz. / 1-gallon / 2-gallon / 10-gallon /50 ml cartridge / 8.4 oz. cartridge
For health and safety information concerning this product, please refer to the MSDS sheets for T-88 Structural Adhesive.
MSDS sheets are available on our website at www.systemthree.com.
Helping you put it all together

T-88 TDS
  1. P. 1

  2. P. 2

    SYSTEM THREE T-88®STRUCTURAL EPOXY ADHESIVEINTRODUCTIONT-88 ® is a high performance, non-brittle, two-part epoxyadhesive designed to give superior...
  3. P. 3

    ••Method 2Solvent wipe — wipe the surface with clean white cottonrags moistened in clean lacquer thinner.While the surface is still wet...
Text version

All System Three Resins catalogues and brochures

  1. Spar Varnish TDS

    1 Pages

    En
  2. QuikFair TDS

    1 Pages

    En
  3. Sculpwood TDS

    1 Pages

    En
  4. G2 TDS

    1 Pages

    En
  5. QuickCure TDS

    1 Pages

    En
  6. S1 TDS

    1 Pages

    En
  7. EndRot usage 01

    2 Pages

    En
  8. Cold-Cure TDS

    1 Pages

    En
  9. SB-112 TDS

    2 Pages

    En
  10. Rot-Fix TDS

    1 Pages

    En
  11. SYS3 TDS

    1 Pages

    En

Archived catalogues

  1. STR Epoxy Catalog

    24 Pages

    En