SPRENGER Boat fittings 2015/16
75Pages

{{requestButtons}}

Catalog excerpts

SPRENGER Boat fittings 2015/16 - 1

2015/16 HERM. SPRENGER GmbH Metallwarenfabrik Manufacturer of boat fittings Alexanderstraße 10-21 · 58644 Iserlohn · Germany P.O. Box 24 53 · 58634 Iserlohn · Germany Phone +49 (0) 23 71 95 59-0 Fax +49 (0) 23 71 95 59-70 boot @sprenger.de www.sprenger.de BOAT FITTINGS

Open the catalog to page 1
SPRENGER Boat fittings 2015/16 - 2

YOUR BENEFIT: Products for racing and cruising sailors as well as for the industrial use Made in Germany – manufactured at works Iserlohn „Highly recommended!“ test winner Carsten Scholz Sales manager Permanent quality checks during and after production Examined trade goods to complete the program usefully Complete after sale service including advice Damian Lellek Sales Germany: North Sales Export: Benelux lellek@sprenger.de Phone +49 (0) 2371 9559-43 Harald Wildenauer Sales representative Germany South, East Product development in co-operation with leading racing sailors Very good tests in...

Open the catalog to page 2
SPRENGER Boat fittings 2015/16 - 3

WHY QUALITY IS SO IMPORTANT FOR SPRENGER. The SPRENGER customer can rely 100 % on the materials used in our products. Because for the racing and cruising, it depends on each connection. Boat fittings, especially blocks, have to withstand unimaginably large forces under any condition. They must run smoothly, even at high loads. With the new S-Block Series SPRENGER will more than meet both requirements. Available in three different bearing variations and rope strengths – for maximum safety and stability and of course, ”Made in Germany“. This claim is evident in the selection of our raw...

Open the catalog to page 3
SPRENGER Boat fittings 2015/16 - 4

S-BLOCKSERIES 8 mm – page 8 -13 10 mm – page 14 -17 12 mm – page 18 -21 Complete tackles Boom brake Traveller track Snap hooks 84-86 Ring nuts and eye bolts 10 mm blocks with plastic cheek parts Industry blocks Racing shackles 99 Chain plates and accessoires 100-101 Stay adjuster plates 116 Spray hood fittings Keel roller Floor rings and   bow handles Anchor chain connector Kapok pillows Course Keeper Lock hooks and buoy hooks Hiking straps and safety bags 104 Rubber rope and sail embedder Tarpaulin steel and accessoires High load blocks Reefing claws Upright blocks Micro xs blocks for wire...

Open the catalog to page 4
SPRENGER Boat fittings 2015/16 - 5

SLIDING BEARING SLIDING BEARING SLIDING BEARING SLIDING BEARING S-BLOCKSERIES 8 mm Sliding Bearing • Wobble riveting avoids sharp burrs on the rivet head • Cheek of glass fibre reinforced polyamide (UV-resistant) • Compact construction, low overall height • With removable becket • Made in Germany • Heavy-duty sliding bearing • Especially suitable for standing loads • Optimized rope guidance by specially formed cheek parts • Continuous strap of stainless steel for more security and stability • Identification of the bearing (yellow point = sliding bearing) • Marking of the maximum rope Ø in...

Open the catalog to page 5
SPRENGER Boat fittings 2015/16 - 6

BALL BEARING BALL BEARING BALL BEARING BALL BEARING S-BLOCKSERIES 8 mm Ball Bearing • Wobble riveting: avoids sharp burrs on the rivet head • Cheek of glass fibre reinforced polyamide (UV-resistant) • Compact construction, low overall height • With removable becket • Made in Germany • Easily running plastic ball bearing • Especially suitable for slightly veering • Optimized rope guidance by specially formed cheek parts • Continuous strap of stainless steel for more security and stability • Identification of the bearing (red point = ball bearing) • Marking of the maximum rope Ø in the...

Open the catalog to page 6
SPRENGER Boat fittings 2015/16 - 7

NEEDLE BEARING NEEDLE BEARING NEEDLE BEARING NEEDLE BEARING S-BLOCKSERIES 8 mm Needle Bearing • Wobble riveting avoids sharp burrs on the rivet head • Cheek of glass fibre reinforced polyamide (UV-resistant) • With removable becket • Made in Germany • Low-friction needle bearing (stainless steel) • Very high working load: min. 300 kg • Easily running even with high loads • Optimized rope guidance by specially formed cheek parts • Continuous strap of stainless steel for more security and stability • Identification of the bearing (blue point = needle bearing) • Marking of the maximum rope Ø...

Open the catalog to page 7
SPRENGER Boat fittings 2015/16 - 8

SLIDING BEARING SLIDING BEARING SLIDING BEARING SLIDING BEARING S-BLOCKSERIES 10 mm Sliding Bearing • Wobble riveting avoids sharp burrs on the rivet head • Cheek of glass fibre reinforced polyamide (UV-resistant) • Compact construction, low overall height • With removable becket • Made in Germany • Heavy-duty sliding bearing • Especially suitable for standing loads • Optimized rope guidance by specially formed cheek parts • Continuous strap of stainless steel for more security and stability • Identification of the bearing (yellow point = sliding bearing) • Marking of the maximum rope Ø in...

Open the catalog to page 8
SPRENGER Boat fittings 2015/16 - 9

NEEDLE BEARING NEEDLE BEARING NEEDLE BEARING NEEDLE BEARING „Highly recommended!“ S-BLOCKSERIES 10 mm Needle Bearing • Wobble riveting avoids sharp burrs on the rivet head • Cheek of glass fibre reinforced polyamide (UV-resistant) • With removable becket • Made in Germany • Low-friction needle bearing (stainless steel) • Very high working load: min. 360 kg • Easily running even with high loads • Optimized rope guidance by specially formed cheek parts • Continuous strap of stainless steel for more security and stability • Identification of the bearing (blue point = needle bearing) • Marking...

Open the catalog to page 9
SPRENGER Boat fittings 2015/16 - 10

SLIDING BEARING SLIDING BEARING SLIDING BEARING SLIDING BEARING S-BLOCKSERIES 12 mm Sliding Bearing • Wobble riveting avoids sharp burrs on the rivet head • Cheek of glass fibre reinforced polyamide (UV-resistant) • Compact construction, low overall height • With removable becket • Made in Germany • Heavy-duty sliding bearing • Especially suitable for standing loads • Optimized rope guidance by specially formed cheek parts • Continuous strap of stainless steel for more security and stability • Identification of the bearing (yellow point = sliding bearing) • Marking of the maximum rope Ø in...

Open the catalog to page 10

All SPRENGER catalogs and brochures