| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Bottom contact sensor | | Temperature sensor | | Catch sensor | | |
| | | Height sensor | | Depth sensor | | | Rip sensor | | |
| | | |
| | | | |
| | | |
| | | |
| | | IP | | |
| | | |
| | | - provides information about trawl entrance height and stability. | | - provides info about whether the ground gear is on or off the bottom. Increase your efficiency; stay in touch with the bottom. | | - provides information about the filling rate of fish in the cod end. | | - monitors if the trawl belly is damaged. Detect a ripped trawl early to minimise the damage. | | |
| | | - provides information about the depth and descending/ascending rate related to the surface. | | | - enables you to monitor and boat log the temperature. Fish and bait are temperature sensitive and are located in zones. | | |
| | | |
| | | |
| | | | |
| | | |
| | | |
| | | | | |
| | | |
| | | The trawl belly is not damaged. | | |
| | | Catch sensor is triggered and has been triggered for 38 minutes during the last tow. | | |
| | | The temperature is 6.8o C . | | |
| | | Numeric display showing 5.8 m trawl height and increasing with 1m per minute. | | Bottom contact is indicated on screen and with an audio alarm. The net has been off the bottom for 9 minutes. | | |
| | | Numeric display showing depth in meters and the descent rate in meters per minute. | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | • Catch volume according to your production capacity. • See if the cod end is intact and the trawl is fishing. • Secure the catch quality. • Minimise towing time and save fuel. | | |
| | | • Full control with trawl opening in shooting phase. • Enables you to have a smooth touch down. • Detects incorrect rigged and unstable trawls. | | | • Monitor if the trawl belly is damaged. • Detect a ripped trawl early to minimise the gear damage and cost. | | |
| | | Monitor and log the temperature to see if you are fishing in the right temperature zone. | | |
| | | • Know where the trawl is on the slope. • Full control during shooting of the trawl. | | |
| | | • Gives an alarm if the ground gear lifts off the bottom. • Trim the foot rope weight till you have the perfect balance. • Reduce fish leakage. | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | • Avoid trawling on the bottom; the bottom contact sensor gives alarm when the sensing weight touches bottom. | | |
| | | • Mount the sensor on the foot rope to avoid gear damage. • Mount it in the intermediate section to detect if the trawl collapses. | | |
| | | • The Temperature sensor enables you to monitor and log the temperature. • Fish and bait are temperature sensitive and are located in temperature layers. | | |
| | | • Position the trawl at the right depth according to the fish concentration. • Full overview with additional Depth sensors on the foot rope or the cod end. | | | • Catch volume according to your production capacity. • Avoid splitting the cod end. • See if your trawl is fishing. | | |
| | | • Monitor if the trawl belly is damaged. • Detect a ripped trawl early to minimise the gear damage and cost. | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | • The bottom contact sensor gives an alarm if the ground gear lifts off the bottom. • Trim the foot rope weight till you have the perfect balance. • Mount two or more sensors to see if the wings are lifting. | | |
| | | • Full control with trawl opening in shooting phase. • Enables a smooth touch down. • Detects incorrect rigged and unstable trawl. | | | • Catch volume according to your production capacity. • See if the cod end is intact and the trawl is fishing. • Secure the catch quality. • Minimise towing time and save fuel. | | |
| | | • Know where the trawl is on the slope. • Full control with additional Depth sensors on the foot rope or the cod end. | | |
| | | • Monitor and log the temperature to see if you are fishing in the right temperature zone. | | |
| | | • Monitor if the trawl belly is damaged. • Detect a ripped trawl early to minimise the gear damage and cost. | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | • Monitor the descending speed of the net. • Start pursing at the right time. • Purse with right speed. • Mount two or more sensors. | | |
| | | • Monitor the temperature in the water column. • Detect where the thermo cline is. | | |
| | | • Catch fish close to the bottom. • The Bottom contact sensor gives an alarm when the sensing weight touches the bottom. | | |
| | | |
| | | |
| | | |
| | | Award for exellent design The PI sensors are sealed entirely in polyurethane for protection, making them virtually unbreakable. They look great too - with the PI range recently winning a top Norwegian design award! | | |
| | | • Monitor and log the temperature to see if you are fishing in the right temperature zone. | | |
| | | • Monitor the sinking speed of the net. • Start hauling when the net reaches bottom. | | |
| | | • Avoid lifting the net off the bottom. • Make sure the net is in balance. | | |
| | | • Mounted on the head rope to have full control of distance from head rope to bottom during setting and hauling. • Detects if the net is balanced and stable for optimum catch. | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |