Gennaker bowsprit

Bowsprit kits
Description Art. No. Kit Ø 72/72 L= < 2080 mm 072-072-70 Kit Ø 75/75 L= < 2230 mm 075-075-70
Kit Ø 87/87 L= < 2270 mm 087-087-70
Kit Ø 99/99 L= < 3160 mm 099-099-70
Outboard end: cast aluminium, composite adapter. Incl in kit Inboard end: cast aluminium, composite adapter, Incl in kit stainless steel plunger. Rubber pads underneath prevent chafe on deck. Pad eyes 508-750-01, incl. in kit.
Bow bracket integrated with bow anchor fitting. Bow brackets
Bowsprit, diameter Art. No. Ø 72/72 508-759-01 Ø 75/75 508-759-02 Ø 87/87 508-759-04
Ø 99/99 508-754-05
Ø 72/72 508-758-01
Ø 75/75 508-758-02
Ø 87/87 508-758-04
Ø 99/99 508-757-05 Ø 72/72 508-772-01
Ø 75/75 508-772-02
Ø 87/87 508-772-04 Stainless steel bow bracket with PA inner
lining. To be bolted to
deck or rail.Stainless steel bow ring with PA inner lining. Can
be welded to bow anchor
fitting or sturdy pulpit. Stainless steel bow
bracket with PA inner
lining. To be integrated
with some bow anchor
fittings (e.g. Jeanneau). Dimensioning
Approx. displ. 72/72 75/75 87/87 99/99 (tonnes) RM Max free length, outside the bow ring/bow bracket (mm)* 1.7 8 1339 2.1 10 1144
2.4 12 1006 1602
2.8 14 902 1437
3.1 16 821 1308
3.4 18 756 1203 1584
3.7 20 702 1117 1471
4.5 25 600 955 1257
5.2 30 527 839 1105 1612
5.9 35 753 991 1446
6.7 40 685 902 1316
7.3 45 631 830 1212
8.0 50 586 771 1125
8.7 55 548 721 1052
9.3 60 515 678 989
10.0 65 641 935
10.6 70 608 887
11.3 75 579 845
11.9 80 554 808
12.5 85 530 774
13.1 90 510 743
13.8 95 716
14.4 100 690
15.0 105 667
15.6 110 645
16.1 115 626
16.7 120 607
Minimum inboard 580 600 700 800 end (mm)
MSL at inner 1.51 2.32 2.61 3.34 end (kN)** Extendable gennaker bowsprit. Sold as a kit for deck mounting. Just fit the two stainless steel pad eyes to the deck in line with the bow bracket. This bracket is a stain-less ring with a low friction polyamide inner lining through which the bowsprit slides into the ?active?
position. After the gennaker is doused, the bowsprit can
slide back and be secured to the aft eye. If required,
it can be quickly removed and stowed securely below.The gennaker tackline runs through the bowsprit, ente-ring and leaving via well rounded holes, and then aft to
the cockpit. An alternative is to fit an external tack block
at the outboard end. ? Gives the gennaker more clear air ? Facilitates rapid gybing
? Always ready for quick extension
? Makes for fast and efficient gennaker handling
? Improves performance when gennaker sailing
? Can be fitted to most yachts The kit includes:? Aluminium bowsprit
? Inboard end complete with plunger and pop rivets
? Outboard end fitting attached to the bowsprit
? 2 stainless steel pad eyes (508-750-01)
? Instructions
* If a waterstay is attached to the out-board end the bowsprit can protrude
even further.
** MSL = Max Service Load, based
on minimum inboard end.
MSL at bow bracket = MSL at inner
end x (1 + min inboard end/max free
length). 144145