Text version of the page 
Toggles
If the boat is fitted with a bow anchor, it may be necessary to permanently raise the lower bearing assembly for anchor clearance. A selection of extension links
are available.If the lower bearing assembly is raised by means of an extension link, a Furlex fork/fork toggle, should be fitted between the link and the forestay attachment.
Eye/fork toggle Forestay Art. No. Length H Ø Clevis pin Fork width Ø Eye dia., mm mm D
2 mm W
2 mm D
1 mm
4 174-102-01 25 8 8 8 5 174-103-01 35 9.5 10 10 6 174-104-01 40 11 12 11 7 174-105-01 45 13 12 13 8 174-106-01 50 15.8 12 16 10 174-107-01 65 15.8 20 16 12 174-125-01 95 19 22 20 14 174-133-01 95 22 22 23 16 174-126-01 120 22 25 23 D
1 D
2 H
D W
2 Standard Furlex Forestay Art. No. Length H Ø Clevis pin Ø Clevis pin Fork width Fork width fork/fork toggle dia., mm mm D
1 mm D
2 mm W
1 mm W
2 mm
4 517-056-02 25 8 8 7.5 8.5 5 517-054-02 30 10 10 10 11 6 517-046-02 40 12 10 11 11 7 517-047-02 40 12 12 11 12.5 8 517-048-02 50 14 14 14 15.5 10 517-060-04 55 16 16 14 16 12 517-052-02 65 19 19 20.5 21 14 517-053-02 80 22 22 20.5 23 16 517-074-02 85 25 22 22 26 W
1 1 W
2 HD
2 T/fork toggle Forestay Art. No. Length H Ø Clevis pin Fork width dia., mm mm D
2 mm W
2 mm
4 174-127-01 60 8 8 5 174-128-01 70 9.5 10
6 174-122-01 80 11 12
7 174-123-01 90 13 14
8 174-124-01 100 15.8 16
2 HD W
2 Stemball/Eye toggle Forestay Art. No. Length H Ø Clevis pin Fork width Heigth HB Radius R Ø Stemball with Fork/fork toggle dia., mm mm D
2 mm W
2 mm mm mm D
1 mm
5 517-065-01 138 10 11 8.5 10 26 6 517-066-01 152 10 11 8 10 26 7 517-067-01 157 12 12.5 9 15 34 7 517-097-01 153 12 12.5 11 13 26 8 517-068-01 197 16 15.5 9 15 34 10 517-068-02 202 16 16 9 15 34 12 517-069-01 226 19 21 8.5 15 34
1 RW D
2 HHBD
2 Eye/Fork extension link* Forestay, Art. No. Length H Ø Clevis pin Fork width Ø Eye Gauge dia., mm mm D
1 mm W
1 mm D
2 mm W
2 mm
6 517-063-01 90 12 11 12 6 7 517-063-01 90 12 11 12 6 8 517-062-01 130 16 14 16.5 10 10 517-062-01 130 16 14 16.5 10 12 517-075-01 190 19 20.5 20 12 14 517-076-01 190 22 20.5 22.5 16 W
1 D
2 D
1 H W
2 * The standard Furlex fork/fork toggle must always be fitted between the extension link and the forestay attachment of the boat. This in order to secure proper articulation in all directions.
Can be used to lengthen a Furlex system. Fit it underneath
the standard fork/fork toggle or
at the top end of the Furlex wire.
Needed to connect the Furlex to a Seldén backing plate for
T-terminals.
Needed when fitting Furlex to some masts of other origin than
Seldén.
114115