Choose the right Furlex
Complete kit containing everything you need:
? Forestay wire
? Wire marine terminal
? Halyard swivel
? Lower bearing part
? Split line drum
? Line guide fitting
? Line drum housing
? Furling line
? Two halyard leads,
insulating sheets, screws
? Drill bit
? Torx key set
? Stanchion blocks
? Locking adhesive
? Lubricating grease
? Top guard
? Luff extrusion
? Joining sleeves
? Connecting feeder
? Sail feeder
? Manual, spare parts list
? Certificate of guarantee Furlex Forestay Max. Art. No. Art. No. series dia., mm forestay Standard Incl. length, m version rigging screw
100S 4 8.1 027-019-51 ? 4 10.5 027-019-52 ?
5 8.1 027-019-53 ?
5 10.5 027-019-54 ?
5 12.9 027-019-55 ?
6 10.5 027-019-56 ?
6 12.9 027-019-57 ?
200S 6 10.6 031-021-51 031-021-61
6 13.0 031-021-52 031-021-62
6 15.4 031-021-53 031-021-63
7 13.0 031-021-54 031-021-64
7 15.4 031-021-55 031-021-65
7 17.8 031-021-56 031-021-66
8 15.4 031-021-57 031-021-67
8 17.8 031-021-58 031-021-68
300S 8 15.5 039-027-51 039-027-61
8 17.9 039-027-52 039-027-62
10 15.5 039-027-53 039-027-63
10 17.9 039-027-54 039-027-64
10 20.3 039-027-55 039-027-65
400S 12 17.7 049-034-51 049-034-61
12 20.1 049-034-52 049-034-62 12 22.5 049-034-53 049-034-63 14 20.1 049-034-54 049-034-64 14 22.5 049-034-55 049-034-65
500S 16 23.0 060-046-56 060-046-66
16 27.8 060-046-57 060-046-67Furlex is available with Dyform wire. Please ask your dealer for details.
Simple to install, easy to maintain It only takes a couple of hours to fit a Furlex system to your yacht. As the Furlex kit comes complete with all the materials and a full set of instructions, you can easily fit it yourself. When you fit a Furlex you have invested in a virtually maintenance-free piece of kit. You set your sail after launching and then just keep on furling and reefing throughout the season. When the season is
over you simply rinse the various parts with fresh water, wait for them to dry
and then grease the halyard swivel and lower bearing assemblies. The Furlex kit
even includes the grease. What could be simpler?
FL-(E+F)*FL
Furlex Forestay Rod Navtec OYS** BSI Max righting moment Approx. DH DW DD E F ID W2 D2 Forestay Extension Halyard series dia. dia. (Riggarna) (kNm) at 30° heel displacement, tonnes mm mm mm mm mm mm mm Clevis adjustment link sheave box mm (mm)
Masthead rig Fractional rig Masthead rig Fractional rig pin dia., mm H mm Art. No.
100S 4 ? 6.5 8 1.3 1.5 100 80 152 280 360 17 8.5 8 ? ? 505-004-10 5 ? 10 14.5 2.3 3 100 80 152 280 360 19 11 10 ? ? 505-004-10 6 ? 17 22 3.5 4 100 80 152 280 360 24 11 10 50 90 505-006-10200S 6 -8 (5.7) X X X 19 23 3.5 4.5 120 94 186 330 440 24 11 10 60 90 505-006-10 7 -10 (6.4) X X X 27 34 5.5 7 120 94 186 330 440 24 12.5 12 60 90 505-006-10 8 -12 (7.1) X X 37 45 7.5 9 120 94 186 330 440 31 15.5 14 60 130 505-012-10 -15 (7.5) X* X 300S 8 -12 (7.1) X X 40 50 8 10 147 113 216 400 550 31 15.5 14 80 130 505-012-10 -15 (7.5) X X 10 -17 (8.4) X X 70 80 14 15 147 113 216 400 550 34 16 16 80 130 505-012-10 -22 (9.5) X X X 400S 12 -30 (11.1) X X X 120 160 20 26 200 140 250 535 620 40 21 19 100 190 505-012-10 14 -30 (11.1) X 180 190 28 30 200 140 250 535 620 50 23 22 100 190 505-012-10 -40 (12.7) X X X 500S 16 -40 (12.7) X X 230 250 38 40 200 140 250 535 620 50 26 22 100 ? 505-038-01 -48 (14.3) X X X DWDD
F
EDH FL = forestay length IDD2W2 H * As the male part of this rod terminal type/size is too large to pass through the luff extrusions, the rod forestay can only be cold-headed at its upper terminal end after the stay has been pulled through the assembled extrusions. The extrusion must be made 200 mm (8") shorter than the stay at the top to make room for the cold-heading machine. Consequently, the luff extrusions length and available sail space is reduced. The system has to be assembled at the location of the cold-heading machine. ** The upper eye terminal must be of the MNY type.
Extension link: Used to increase the distance between the lower unit and
the deck for a bow anchor etc.
The optional rigging screw for Furlex 200S-
500S. Furlex standard toggle.
112113