Benefits when racingFurlex with rod forestay Bush packs* Rod Diameter Type of Series Art. No. mm Furlex S TD H Bushings for Navtec, BSI and OYS rods are available from Seldén. Your rod rigger will supply the rod fore-stay and upper marine terminal part, slide on the joining sleeves, rod bushing and Sta-lok hole screw, and form your rod heads. Navtec -8 5.7 200 X X 301-407-02Navtec -10 6.4 200 X X 301-408-02Navtec -12 7.1 200/300 X X X 301-409-02Navtec -17 8.4 300 X X X 301-413-02Navtec -22 9.5 300 X X X 301-410-02Navtec -30 11.1 400 X X 301-411-02Navtec -30 11.1 400 X 301-411-03
Navtec -40 12.7 400 X X 301-412-02Navtec -40 12.7 400 X 301-412-03
Navtec -48 14.3 500 X 301-616-02
OYS (Riggarna) R-8 5.7 200 X X 301-401-02OYS (Riggarna) R-10 6.4 200 X X 301-402-02OYS (Riggarna) R-15 7.5 200/300 X X X 301-403-02OYS (Riggarna) R-22 9.5 300 X X X 301-404-02OYS (Riggarna) R-30 11.1 400 X X 301-405-02OYS (Riggarna) R-30 11.1 400 X 301-405-03
OYS (Riggarna) R-40 12.7 400 X X 301-406-02OYS (Riggarna) R-40 12.7 400 X 301-406-03
OYS (Riggarna) R-48 14.3 500 X 301-615-02
BSI -8 5.7 200 X X 301-418-02BSI -10 6.4 200 X X 301-419-02BSI -12 7.1 200/300 X X 301-415-02BSI -15 7.5 200/300 X X 301-420-02BSI -17 8.4 300 X X 301-417-02BSI -22 9.5 300 X X 301-421-02BSI -30 11.1 400 X X 301-422-02BSI -30 11.1 400 X 301-422-03
BSI -40 12.7 400 X X 301-416-02BSI -40 12.7 400 X 301-416-03
BSI -48 14.3 500 X 301-634-02 Sta-lok hole screw Rod bushing Standard eye
terminal * Includes instructions, bushing and a Sta-lok hole screw. Always needed for
rod installation. With a Furlex on board, you have everything you need to quickly adapt your yacht for racing. The line drum and line guide fitting are
easily removed, enabling you to tack the sail directly to the deck. Detach the sail feeder, and the halyard swivel can be dropped right down to the lower bearing assembly. Reassemble it, and the forestay
extrusion is now ready for racing. The extrusion features twin luff grooves, giving you the potential for fast, race-winning sail changes. Extrusions and joining sleeves If the rod rigger is located far from the boat, it is practical to provide him with a separate kit of joining sleeves. This way he can coil the formed rodstay and deliver to the boat
for final assembly. A set of luff extrusions, excluding joining sleeves, should also be
delivered to the boat. Alternative 1: Alternative 2: Furlex Max. length, mm Complete set Set of extrusions, Separate kit of series of extrusions excl. joining sleeves joining sleeves 200S 10600 539-565-12 539-565-22 539-567-01 2400 (extra extrusion) 539-565-16 539-565-26
300S 15500 539-265-12 539-265-22 539-267-01
2400 (extra extrusion) 539-265-16 539-265-26
400S 17700 539-165-12 539-165-22 539-167-02
2400 (extra extrusion) 539-165-15 539-165-25
500S 23000 539-423-11 539-423-21 539-427-11
4800 (extra extrusion) 539-423-10 539-423-20 Alternative 1: Rod is to be formed at the location of the boat. Alternative 2: Rod is to be formed remote from the boat.These set of extrusions, both alternatives, include slotted distance tubes to be snapped on to the headed rod. 110111