Seldén furling mast specifications

Specifications of hydraulic motors

Luff grooveSpace for luff tape

Model Motor Max. torque Nominal speed Nominal Nominal oil Max. oil Rec. min. power Max. sail designation at max. luff extrusion oil flow pressure pressure hydraulic pack area m

2

pressure, Nm (n), rpm (Q), l/min (p), bar (p), bar (P) kW

Sail chamber Type RB OML 12.5 158 40 10 40 120 1.5 60Type RC OML 12.5 158 40 10 40 140 2.0 60
Type RD OML 12.5 158 40 10 40 140 3.0 80
Type RD OML 20.0 230 40 20 40 140 4.0 120
Type RD Built-in OML 20.0 255 40 20 40 140 3.0 120 Sail slot

Spare luff groove Drive optionsMast Type Sail Sail Max foot Luff Max. space Rec. slide Manual Hydraulic Electric section chamber slot length groove for luff tape (Voltage) dia., mm mm E, mm mm dia., mm

F176 RA 85 15 ±3 3750 3.25 6 ? X F194 RA 93 4200 X X (12)F212 RA 100 4500 X X (12) RB 4400 X X (12)F228 RA 108 5000 8 Aquabatten AO31 X X (12)
RB 4900 or Rutgerson 101 X X (12)
F246 RB 114 5400 X X X (12)F265 RB 123 17 ±3 6000 10 Aquabatten AO32 X X X (12)
RC 5800 X X X (12/24)F286 RB 133 6500 X X RC 6300 X X X (12/24)F305 RB 141 6900 X X RC 6700 X X X (12/24) RD 6000 X R324 RC 154 15 ±3 7000 4.0 12 Aquabatten AO32 X X (12/24)
or Rutgerson 101 R370 RD 174 7500 3.3 13 Aquabatten AO33 X or Rutgerson 102

Covers and plugs Furling gear and luff extrusion

Description Art. No. Type Gear ratio Diameter Luff groove Max space for manual drive mm mm luff tape, dia., mm

Cover for access to sail-feeder and 540-026
tack attachment. 57 x 126 mm. Cover for access to sail-feeder and 540-120 tack attachment. 72 x 207 mm. Grease hole cover, Ø 44 mm. 319-609 Grease hole cover, 25 x 60 mm. 319-574 RA 1.75:1 25 2.75 ±0.25 6 RB 2:1 30 3.25 ±0.35 8 RC 2:1 38 3.25 ±0.25 10
RD ? 58 3.25 ±0.25 10 Luff grooveSpace for luff tape

102103