Electric cruise control

New mast or retro-fit

Is your deck layout giving you a hard time leading a furling line back to the cockpit? Are you fed up with operating your furling mast
with a winch handle at the mast? Upgrade with electric drive and
stay in the safety of the cockpit. Seldén electric furling is available
as a retro fit kit for manual furling masts or custom built for new
Seldén furling masts.

Emergency handle (1/2 " socket), Length: 100 mm, Art. No. 533-922
(incl. in retro-fit kit).
Length: 325 mm, Art. No. 533-923
(used when a winch is in conflict with
the handle). Junction box, Art. No. 532-300-02. Switches: Green (out), Art. No. 540-459-02, Red (in), Art. No. 540-460-02,
Stainless panel (dim 100 x 56 x 3 mm),
Art. No. 540-462-01 is optional. Control box, Art. No. 532-505.

Complete upgrading kit. Retro-fits to your manually
operated furling mast.

Tack assembly Cover assembly Top swivel Halyard swivel Luff extrusion Starboard side Emergency handle socket

? Completely built-in. ? Operated from the safety of the cockpit.
? Planetary gear with permanently set brake. Released only when the motor is running. ? Drive release for emergency furling.
? Control box with factory-set rotation speed and maximum torque. Current cuts out at maximum torque and is automatically
reconnected after two seconds. Prevents
overloading. ? Asymmetric and tensioned luff extrusion in combination with stainless steel ball bearings with load distributor makes for
low furling resistance.? Wide sail slot allows for vertical battens and positive roach.? Retro-fits to manually operated driven furling mast.

Gear housing Electric motor unit Access to sail feed
and halyard swivel Access to tack hook and tensioning screw Emergency handleJunction boxSwitchesControl box Outhaul
To winch Release lever Emergency gear Outhaul car

Retro-fit installation kits

Cover

Mast Model Kit Control packsection Type Voltage Art. No. Incl. switches Excl. switches

Motor unit

Cables for installation below deck

R232 (B171) RB 12 532-501-30 532-505-01* 532-505-02R232 (B200) RB 12 532-501-29
R260 (B171) RB 12 532-501-32
R260 (B200) RB 12 532-501-31
R290 (B171) RC 12 532-502-31 24 532-503-31
R290 (B200) RC 12 532-502-30
24 532-503-30
R324 RC 12 532-502-23
24 532-503-23
F228 RB 12 532-501-20
F246 RB 12 532-501-21
F265 RB 12 532-501-22
F265 RC 12 532-502-20
24 532-503-20
F286 RC 12 532-502-21
24 532-503-21
F305 RC 12 532-502-22
24 532-503-22
F324 RC 12 532-502-24
24 532-503-24 Outhaul

(from mast to control pack)

Motor cables

Art. No. Area, mm

Length, m

531-026-03 16 3531-026-04 16 4531-026-05 16 5531-026-06 16 6531-026-07 16 7531-026-08 16 8531-026-09 16 9531-026-10 16 10531-029-03 25 3531-029-04 25 4531-029-05 25 5531-029-06 25 6531-029-07 25 7531-029-08 25 8531-029-09 25 9531-029-10 25 10

Technical information

Mast Model E

max

Speed Max running Required cable, mm

Fuse (A) section Type Voltage mm rpm torque, Nm (between battery and control box) 12V / 24V <8 m 12V / 24V >8 m 12V / 24V

F228 RB 12 4900 38-40 150 25 / ? 35 / ? 125 / ?F246 5400
F265 6000
RC 12 / 24 5800 230 35 / 25 50 / 35 160 / 125
F286 6300
F305 6700
R324 7000 * Includes control box, junction box, lubricating grease, instructions and switches. For more information please see our instructions for installation, www.seldenmast.com

100101