RCB, full-batten system for retro-fitting on E-sections and D-sections

Universal
C
Ø 12A
BH
D The Seldén RCB (Round Circulating Ballbearings) full-batten system facilitates full-batten sail management,
and makes it much easier to set and reef the mainsail.
The system is based on linear ball races and recirculating
balls. The cars run with hardly any friction at all, even under the high compression loads produced by full-length battens.The track and cars are made from aluminium which, together with Torlon ball bearings, makes the system
strong and durable. The attachment can be used in conjunction with most batten fittings. It provides the full freedom of movement
so essential for easy operation and long life.
Description Reference Dim., mm Headboard toggle* A Min. 59 C 96
D 40Batten fittings Rutgerson: Nr 1500 B 56
Nr 1505 B 59 Nr 1510 B 61 Nr 1590 B 56 Aquabatten: SDA-A 41219 B 73 A453Cars H 26 D RCB batten car with eye. * Clevis pin = Ø 10 mm Hole in head board toggle = Ø 12 mm Standard Righting moment at 30° heel Masthead 70 kNm Fractional 50 kNm
Approx. displacement Masthead 12-14 tonnes
Fractional 8-10 tonnes Heavy duty Righting moment at 30° heel Masthead 120 kNm
Fractional 90 kNm
Approx. displacement Masthead 20-24 tonnes
Fractional 15-18 tonnes Practical The swivel fitting can easily be removed from the car ? an advantage when the sail is to be fitted or removed
from the mast. It can also be sent separately to the
sailmaker for fitting to the sail.
Easy to fit.
RCB batten car with M10 bolt. Locking fork, Art. No. 511-591.Plastic washer, Art. No. 164-039. Black anodised RCB car with lightening holes. Used for carbon masts. Art. No. 511-703-11. Description Art. No. Remarks " ). Other masts can be fitted with the track by screwing it directly in place.For Isomat, see remarks on next page.
Complete extrusion set including connection 515-525-12 * Fasteners for Isomat/Sparcraft masts NG60, NG70, NG80, NG86, NG105pieces and fastenings. L = 12850 mm** (sail groove slot 14 mm)
Extrusion set excluding connection 515-525-22 Fasteners for extrusion set (L = 12850 mm): Art. No. 515-561-10
pieces and fastenings. L = 12850 mm* Fasteners for extra extrusion (L = 2300 mm): Art. No. 515-561-01
Extra extrusion length including connection 515-525-11 Additional set of fasteners for heavy duty application (L = 2300 mm):
piece and fastenings. L = 2300 mm** Art. No. 515-561-03
Extra extrusion length excluding connection 515-523-02
piece and fastenings. L = 2300 mm* ** Fasteners for Isomat/Sparcraft masts 1-260 and 1-330 (sail groove slot 5 mm).
Headboard cars without toggle 2 x 511-581-11 Fasteners for Seldén masts can be used.
Car without eye 511-581-11
Black anodised car with lightening holes, 511-703-11 *** For carbon masts.
excl eye/M10 bolt***
Headboard toggle 511-595-11
M10 bolt 511-598-01
Eye (Sailcar) 511-590-01
Extra set of fastenings for 2300 mm 515-535-03
heavy duty extrusion. Easy to fit The RCB track, which comes complete with screws and special nuts, is easy to fit on a Seldén mast.
Just push the track into the original mast groove and
tighten up. The attachment system is tailored to Seldén
masts, but it will also fit those with a similar luff gap
(approx. 6 mm or 1/4
FittingsCarsTrack 5051