Sail entry, Sail entry,

C-sections P-sections, E-sections and D-sections

The new sail entry gate is designed for use with our
new MDS cars or with
conventional sail slides.
When using it with MDS
cars, you simply remove
the sail entry gate when
installing or removing the
cars. When using it with
conventional slides, use the
spring-loaded mid section
of the sail entry gate. Sail entry
Sail entry gate Art. No. Mast section Type A (large), complete: 505-501-01 E138, E155, E170, E177Cassette 505-501 E189, E206, E224, E237Tongue 505-502 E274Rubber spring pad 530-357
Track gate insert 505-516-01
Type B (small), complete: 505-503-01 E122, E130
Cassette 505-503 D109, D121Tongue 505-504Rubber spring pad 530-358
Track gate insert 505-524-01 Sail entry gate C156-C305,
Art. No. 505-519-01 One, two, ready. Sail slide cassette kit Track gate insert for
fully-battened sails
Sail entry gate easily removed to fit or remove Seldén MDS cars. Sail entry gate designed for use with Seldén MDS cars or conventional sail slides. For detailed information about our conventional sail slides, please see Sailmakers
Guide, www.seldenmast.com. For a fully-battened main-sail with the batten cars
running in the standard
sail track, this track gate
insert should be used. You can improve an old mast by using a cassette
tube for the luff groove.
The cassette is easily fitted
into the widened luff groove of the mast.
The sail slides are fed in through the spring-loaded gate. When reefing, the sail slides pass through the closed track gate down to the boom, holding the sail in place and facil-itating faster and safer reefing. When the spring-loaded section of the track gate is removed, the track gate can
just as easily be used with a luff rope. Bolt rope extrusion and sail entry Sails with bolt rope can be used in our C-sections. A new sail feeder is assembled approximately 700 mm above the
boom bracket. The PVC bolt rope extrusion is fed into the
standard luff groove.
The sail slide cassette kit (505-514-01) fits the following widened mast sections: Mast section Bolt rope extrusion Sail entry Art. No. and length Art. No. 111/81, 123/90, 126/85, D137/100, 147/95, 152/111 162/104, 169/123, 178/115, 188/137, 216/139 Type A (large), Art. No. 505-516-01.Type B (small), Art. No. 505-524-01. C156-C304 535-710 (6000 mm) 505-526-01 4647