|
Stand
|
Product Catalogue, YACHT - 90 Pages
How to order the right spreader
Spreader ends
Intermediate shroud (D2)
Cap shroud (V1–V2)
The design of the spreader ends varies with rig type,
the number of spreaders, and whether the lateral rigging
is linked or continuous.
C-section
F-section
Forward
E-section
Spreader end plug for continuous rigging.
D-section
R-section
Check size and type of mast section.
Do you have P-spreaders, T-spreaders
or V-spreaders? What type of spreader
end plugs?
D4
a°
S (mm)
Spreader end plug for V-spreader.
V3
D3
If swept, what angle?
a° = arcsin S
L
( )
V2
L (mm)
D2
Spreader end plug for linked rigging.
V1
Forward
V1
D2
D1
Measure the length of the front edge
of the spreader from inner end to outer
end, excluding end plug (L). Do not forget to state whether the spreader is to
port or starboard. See following pages
for details of different spreader types
and article numbers.
Aft
Spreader end cup for Rod Tip Cup.
36
Continuous rigging.
Keep the order all the
way down to deck.
Hint: Even if you only need to replace one of your spreaders we still recommend you to order a complete pair.
This will ensure that both spreaders have the same angle.
37
-
P. 1
-
P. 15
Halyard routing The routing of halyards is always important, but particu- larly so on yachts with jib furling and reefing systems. A properly... -
P. 16
'etorgs-Posten y swjecf/shmaùchtour.confb ¥ ?- ^ Halyard kits Seldén offers complete halyard kits in various dimensions and... -
P. 17
30 Running backstay attachments Adding a cutter stay to a masthead rig Running backstays may be necessary if a cutter stay for a storm jib or... -
P. 18
Shroud attachments The stemball attachment for lower shrouds or inter- mediate stays is integrated in the spreader bracket. It's a very... -
P. 19
Spreaders The shrouds are attached to the spreaders by a choice of different end caps - clamp, link, or tip cup for rod - depending on the design... -
P. 20
-
P. 21
Spreader brackets and spreader assemblies The tables below give you full information for choosing the right replacement spreader, spreader end... -
P. 22
Spreader brackets, C156-C193. Spreader brackets, C211-CÎ04. Mast Bracket pairsection starboardand portC156522-108-01C175522-109-01C193522-110-01 C211522-116-11*C227... -
P. 23
Spreader bracket clevis pins P-spreaders, clevis pins for spreader brackets Spreader width mm Mast section Spreader bracket set Art.... -
P. 24
Seldén design line for larger mastsThe V-spreaders are a vital part of Seldén’s eye-appealing designc oncept for yachts of around... -
P. 25
Sail entry, C-sections The new sail entry gate is designed for use with our new MDS cars or with conventional sail slides. When using... -
P. 26
-
P. 27
-
P. 28
-
P. 29
-
P. 30
-
P. 40
-
P. 50
-
P. 60
-
P. 70
-
P. 80
-
P. 90
