Shroud attachments

The stemball attachment for lower shrouds or inter-
mediate stays is integrated
in the spreader bracket.
It?s a very strong and dura-
ble solution. The integrated
stemball shroud attach-
ment minimises the num-
ber of fittings on the mast,
which in turn means a
mast with less weight. T-terminal backing plates

Art. No. for shroud dia., mm 3 4 5 6 7 8
507-553-01 507-551-01 507-552-01 507-554-01 507-558-01 507-582-01 507-558-03 (E138*) 507-582-03 (E170*)
507-582-04 (R213*)
507-582-05 (E155*) * Some mast sections require a special backing plate.

Conventional tangs

T-terminal. Art. No. Art. No. Mast Wire dia., 6 and 7 mm Wire dia., 8 mm section Clevis pin dia., 12 mm Clevis pin dia., 12 mm
E177 518-023-04 E189 518-023-02 518-020-01
E206 518-023-09 518-020-01
E224 518-020-02
E237 518-020-03
E274 518-020-04
R232 518-023-10
R290 518-023-07 518-020-02
R370 518-023-08 C-sections. Lower shroud attached to the spreader bracket. Art. No. Art. No. Wire dia., 8 and 10 mm Wire dia., 12 mm Wire dia., 14 mm Mast Clevis pin dia., 14 mm Clevis pin dia., 19 mm section Single Double Single Double
E189 518-031-09 518-030-09 Seltang E206 518-031-01 518-030-01
E224 518-031-02 518-030-02 518-033-01 518-032-01
E237 518-031-03 518-030-03 518-033-02 518-032-02
E274 518-031-04 518-030-04 518-033-03 518-032-03
E321 518-031-14 518-033-14 518-032-14
E365 518-031-13 518-033-13 518-032-13
R235 518-031-10 518-030-10
R232 518-031-06 518-030-06 518-032-15
R260 518-031-05 518-030-05 518-033-04 518-032-04
R290 518-031-07 518-030-07 518-033-05 518-032-05
R324 518-031-12 518-033-12 518-032-12
R370 518-031-11 518-033-11 518-032-11 Double conventional tang. Art. No. Art. No. Wire dia., 8 and 10 mm Wire dia., 12 mm Mast Clevis pin dia., 14 mm Clevis pin dia., 19 mm section Single Double Single Double
F228 518-031-28 518-030-28 F246 518-031-26 518-030-26 518-033-26 518-032-26
F265 518-031-29 518-030-29 518-033-24 518-032-24
F286 518-031-27 518-030-27 518-033-25 518-032-25
F305 518-031-27 518-030-27 518-033-25 518-032-25

3233