Spreader end plug for linked rigging.Spreader end cup for Rod Tip Cup. Linked spreader ends Fit the cap shrouds and intermediate shrouds as per illustration. Extend the intermediate rigging screw. Rod Tip Cups Fit the cap shrouds and intermediate shrouds as per illustration. Extend the intermediate rigging screw. Mast, previously rigged on your yacht • Wash the mast, boom, spinnaker pole, jib furling system and rigid vang, as well as all associated parts using a mild detergent solution. Rinse thoroughly. Treat with yacht polish or boat wax. • Lubricate the sheaves with silicone spray. • Winches should be maintained in accordance with the manufacturers’ instructions. • Lubricate the jib furling system/in-mast furling ball bearings with waterproof grease, in accordance with the separate instruction book. • Treat any ball-bearing full batten system with silicone spray.
Through-bar spreader bracket, incorporates attachments for lower shrouds or intermediate shrouds. Spreader angle. 6° Continued... 17