Tension halyards as for normal sailingMark hereMain halyardUpper edge of sail against black band Fix in position Genoa halyard End of splice

Preparing the cap shrouds and intermediate shrouds • Attach the cap shrouds to the mast. Extend them along the mast, and check that they are the same length. If they are not, mark the difference on a piece of tape and attach the tape to one of the shrouds (e.g. “+ 7 mm”). You can compensate for the difference using the rigging screws.• Attach the intermediate shrouds to the mast and lay these and the cap shrouds along the mast.

Continued...

Spreader bracket Clamping end plug to be fixed in line with spreader brackets, with shrouds tensioned along the mast. Final vertical spreader angle must always be 6°.

15