Catalogs >
Seldén Mast AB >
FURLEX 20S

FURLEX 20S
2Pages

Catalog excerpts

FURLEX 20S Jib Furling Gear Data FURLEX 20S is a furling gear designed for free flying jibs on dinghies. It features stainless steel bearings, adjustable line exit and optional halyard lead arm. Working Limits: Max working load is 500Kg Max expected luff wire is ø3mm. Max furling line ø3, preferred is ø2.5mm. (included). Item Part Number Lower Drum unit Lower Drum Dimensions Top Swivel Dimensions Top pin hole ø5.5 mm Lower pin ø6mm

Open the catalog to page 1

Fitting the furling line. Tie a thumbknot in the dead end of the line. Feed the other end of the line in through the hole in the drum upper surface, and out through the lined side hole. Pull through until stopped by the thumbknot. Rotate the drum and pull line into the unit, retaining slight tension to ensure a tight wrap. Outer Drum Rotation The outer cover can be rotated and locked in one of 15 positions 1. Loosen grubscrews by two turns with a 2mm Allen key. 2. Slide outer cover down to touch clevis pin’s head 3. Rotate outer cover to the required position 4. Slide outer cover up and...

Open the catalog to page 2