Modular Radar mast System . . . . as easy as 1-2-3-4
1. Choose your Top Plate to match your Radar System.
Use our product guide to determine the mast part number to match your radar system. (For example if you need a 6’ mast with a fixed base for a Raymarine 2kw dome than you would start with the part # RP-3R-6). Please remember to use the manufacturer recommended safety height requirements when designing your mast system.Our Anodized Powder Coated Aluminum Mast are available in 3” and 4” diameter sizes. You have the option of mounting your mast through your deck (through deck fittings available, please call), or using our adjustable base mount (
Top Plate
For your radar system 2. Choose the height and diameter of your mast along with the mounting base style.
1 ), which allows your mast to meet deck angle from 0 to 90 degrees. ( 2 ) or our fixed base.
1. Adjustable Base
2. Fixed Base Trim Ring Machined Aluminum hard coat anodized with integral water proof cable gland.For 3” and 4” poles.
Solid Dia-Cast AluminumFor 3” and 4” poles. Machined KingStarboard® with o-ring seal for thru deck installations. Specify 3” or 4” pole. (Size 10.5 x 4.5 inches) (Size 5.25 x 3 x 3.5 inches) 3. Choose your secondary support system for Poles using the Adjustable Base or for poles over SIX feet in height. 4. Choose additional accessories for your radar mast system.
properly you will need either two rail stand-offs, two deck struts or one of each. You can refer to the product guide to assist in selecting the relevant part numbers. Kits containing one rail stand-off and one strut are available. We recommend going up 60% of pole height to achieve maximum strength.
Strut System Stainless Pad Eye For 3” and 4” poles.Contains a stainless clamp, strut (with several lengths to choose from), and pad eye. The struts second attach point. Adjustable Rail Mount Stand-off Stainless clamps and hardware for 3” and 4” pole to rail attachment.(Fits 1” to 1 1/4” top rails)
Choose your accessories. All radar mast tops come LTB ready, (LTB sold seperately). The LTB becomes a secondary mount for GPS, Flood Light Kits, Anchor lights, and more. Our heady duty lifting davit is the perfect finishing touch to your pole system.
Select TWO secondary supports. To support the mast
NEW
LTB-100
PM-U1A Light bar with Perko 1197 masthead/ all-round light
(Shown with Light and GPS, sold seperately) WNE
LTB with PM-U2A
(Light and GPS unit sold seperately) LTB Outboard Lifting Davit Fits directly to pole top for nav. lights or GPS Deluxe Flood Light Kit
(150 lb lifting capacity) Fits either 3” to 4” pole or LTB Page 6