Catalogs >
Sealite >
TRIDENT-3000

TRIDENT-3000
4Pages

Catalog excerpts

Poly-tower assembly Sealite have a range your representative supply your complete mooring solution Also available with complete stainless steel • High visibility red, green, white or yellow as per IALA quadrant hull sections Large battery & payload Excellent buoyancy & Easy to deploy & service Cost effective & environmentally friendly Convenient forklift access points to safely maneuver Friendly & Recyclable Sealite buoy products are made from recyclable materials. As a service to customers, Individual components and products at the end of their service life may be returned to Sealite for recycling. Guard rail radar reflector Access ladder Non-slip deck Sealed tower access door The Trident-3000 is one of the largest rotationally-moulded buoys available, with a float diameter of 3 meters and lantern focal height of up to 5 meters. The float section of the Trident-3000 is built from four (4) roto-moulded quadrants, which fasten together to form an incredibly robust 3 meter wide float section standing 1.8m tall. Each quadrant is moulded from UV-stabilised virgin polyethylene, and has an 18mm wall thickness. In addition, each section is filled with closed-cell polyurethane, which prevents the ingress of moisture in the unlikely event of damage. A galvanised steel or 310-grade stainless steel mooring pole runs through the centre of the assembly, to which the tower section is fastened. Four large lifting eyes aid in buoy mooring The enhanced poly-tower design provides a huge visual area for navaid recognition, and consists of two sealed rotationally-moulded tower sections. The lower section incorporates a battery access door, and houses batteries, controllers, any any ancillary epectronic payload. The top section incorporates an internal radar reflector and solar mount facility. Rotationally-moulded paneling is fitted to the outside of the tower section to create a large coloured visual area for marking. The replaceable paneling also simplifies cardinal marking, and gives operators flexibility in stocking spare components. No part of the structure requires painting at any stage of the products lifespan. An integrated ladder with harness attachment points runs vertically up the tower to the top A large counterweight offers exceptional stability in a variety of exposed regions. The Trident-3000 can be supplied in all IALA colours. Head Office: Internet: www.sealite.com.au Email: info@sealite.com.au USA (Gilford, NH) Internet: www.sealiteusa.com

Open the catalog to page 1

Westernport Bay & Port Phillip Bay, Polyethylene Tower Assembly Shown with poly-tower Stainless Steel Tower Assembly General Characteristics Available Colours Focal Plain Height (mm/inches) Total Float Volume (ltrs/US gallon) Nominal Freeboard (mm/inches) Nominal Draft (mm/inches) Reserve Buoyancy (kgs/lbs) Maximum Mooring Load (kgs/lbs) Draft Maximum (mm/inches) Freeboard, Minimum (mm/inches) Safe Working Load, 1 pt (kgs/lbs) Safe Working Load, 2pt (kgs/lbs) Submergence (kg/cm, lbs/inch) Physical Characteristics Wall Thickness (mm/inches) Ballast (kg/lbs) Height (mm/inches) Width...

Open the catalog to page 2

Port Hand Starboard Preferred Hand Mark Channel to North Cardinal South Cardinal West Cardinal East Cardinal Port Hand Hand Mark Isolated Danger Safe Water The Sealite buoy division provides turn-key production of navigation buoys from tooling development, raw material selection and production, to final testing and inspection. Keeping this entire process in-house allows Sealite to guarantee the superior quality of it's products and ensures fast turnaround times. Each buoy product is rotationally-moulded from UV-stabilisedvirgin polyethylene, with individual components of Sealite's larger...

Open the catalog to page 3

in accordance with IALA recommendations, Sealite's range of Top Marks offer flexibility and maintenance, high visibility solution to marine navigation. on-site from UV-stabilised virgin polyethylene with a wall thickness of of IALA recommended colours and configurations to suit both IALA Regions With a 26mm (1 inch) Internal stainless- steel pole and industry standard 200mm OD mounting plate, Sealite's range of IALA Top Marks can be easily attached mounting stand lantern attachment) wall thickness Industry standard Part Number Port Hand Mark-1 red cylinder (IALA Region A) Port Hand Mark-1...

Open the catalog to page 4