Catalogs >
Sealite >
SLB1250

SLB1250
4Pages

Catalog excerpts

Sealite have a range your representative supply your complete mooring solution Made from strong, durable UV-stabilised virgin polyethylene wall thickness - Foam filled with highly buoyant closed-cell stainless-steel mooring post • Single piece float • Complete unit- ready for Immediate Installation • High visibility red, green, white or yellow as per IALA • High night & day visibility eye bolt for strong mooring chain attachment point • Excellent buoyancy & The SLB1250, 1250mm dia. Navigation Buoy, has proven it's superior performance in many parts of Australia and around the world for long-range river and sea navigation. The base is moulded in one-piece strong, coloured, durable polyethylene - filled with highly buoyant polyurethane and UV-stabilised for resistance to sunlight. The strong, lightweight polyethylene buoy top is moulded in standard IALA high visibility colours and shapes to suit a range of installation requirements. A powder-coated extension pole may be supplied to increase the focal height of the Sealite lantern, as well as an additional base section for extra buoyancy. For superior night visibility, the SLB1250 navigation buoy may be fitted with a range of Sealite solar LED marine lanterns up to 5nm+. Brass inserts provide a secure mounting for top, tower and signs. A 316-grade stainless-steel eyebolt passes through the base providing a strong mooring chain attachment point. In addition, all hardware and fittings are 316-grade stainless-steel. 1250mm diameter Navigation Buoy c/w CAN 1250mm diameter Navigation Buoy c/w CAN shaped top section & double base (2x base sections for increased buoyancy) 1250mm diameter Navigation Buoy c/w CONE 1250mm diameter Navigation Buoy c/w CONE shaped top section & double base (2x base sections for increased buoyancy) Denotes SLB1250 cone-shaped buoy. Double Base configuration. YELLOW. Available in a range of IALA colours and configurations, optional mould-in graphics and with a wide range of IALA recommended Top Marks Head Office: Internet: www.sealite.com.au Email: info@sealite.com.au USA (Gilford, NH) Internet: www.sealiteusa.com

Open the catalog to page 1

Manila Philippines installation SLB1250 buoys are installed throughout Australian rivers & harbours Head Office: Nominal water levi (without mooring) Optional Counterweight General Characteristics Available Colours Focal Plain Height (mm/inches) Total Float Volume (kgs/lbs) Nominal Freeboard (kgs/lbs) Nominal Draft (kgs/lbs) Reserve Buoyancy (kgs/lbs) Maximum Mooring Load (kgs/lbs) Draft Maximum (mm/inches) Freeboard Minimum (mm/inches) Submergence (kg/cm, lb/inches) Physical Characteristics Wall Thickness (mm/inches) Ballast (kg/lbs) Height (mm/inches) Width (mm/inches) Mass (kg/lbs)...

Open the catalog to page 2

Port Hand Starboard Preferred Hand Mark Channel to North Cardinal South Cardinal West Cardinal East Cardinal Port Hand Hand Mark Isolated Danger Safe Water The Sealite buoy division provides turn-key production of navigation buoys from tooling development, raw material selection and production, to final testing and inspection. Keeping this entire process in-house allows Sealite to guarantee the superior quality of it's products and ensures fast turnaround times. Each buoy product is rotationally-moulded from UV-stabilisedvirgin polyethylene, with individual components of Sealite's larger...

Open the catalog to page 3

in accordance with IALA recommendations, Sealite's range of Top Marks offer flexibility and maintenance, high visibility solution to marine navigation. on-site from UV-stabilised virgin polyethylene with a wall thickness of of IALA recommended colours and configurations to suit both IALA Regions With a 26mm (1 inch) Internal stainless- steel pole and industry standard 200mm OD mounting plate, Sealite's range of IALA Top Marks can be easily attached mounting stand lantern attachment) wall thickness Industry standard Part Number Port Hand Mark-1 red cylinder (IALA Region A) Port Hand Mark-1...

Open the catalog to page 4