WoodPaintingnewboatsorbareareasandunpaintedboats

Above the waterlinePre-treatment As above No. ofProduct nameCoating intervalThinner/Abrasive Comments Below the waterlinePre-treatment Degrease using SEAJET BOATWASH. Rinse with fresh water. Degrease oily wood with SEAJET THINNER A. Sand the surface with P80–P180 along the grain. For above water areas only, follow with P280–P320, until it is very smooth. Brush off dust and use lint free tack rags to remove remaining traces of dust. Coatsat 10°C min/maxCleanerPaper3Seajet Universal24 hrs/14 daysThinner U320 dryThin 1stPrimer Undercoatcoatby25% 2–3Seajet Unythane48 hrs/NoneThinner U400 wet orTopcoatfiner Then 3Seajet Universal24 hrs/14 daysThinner U320 dryThin 1stPrimer Undercoatcoatby25%2–3Seajet Glosskeep24 hrs/NoneThinner U400 wet orTopcoatfiner Or 3Seajet 11718 hrs/7 daysThinner E320 dryMultipurpose Epoxy 2–3Seajet 132Polyurethane Topcoat12 hrs/NoneThinner P400 wet or No. ofProduct nameCoating intervalThinner/Abrasive Comments Coatsat 10°C min/maxCleanerPaper4Seajet 0114hrs/7 daysThinner ANoneThin 1stUnderwaterPrimercoatby25% or two component, high performance ï¬nish over bare hard wood Then 1–2SeajetAnti-fouling8 hrs/NoneThinner ANone Then Leave18hoursbeforelaunching.Maximumintervalbeforelaunchingis6months. finer 50

www.seajetpaint.com Helpline01692 406 822