Osmosis ProtectionPaintingnewboatsorbareareasandunpaintedboats

Above the waterlinePre-treatment Degrease using SEAJET BOATWASH. Rinse with fresh water.Flatten back with P180–P280 abrasive paper. Brush off dust and use lint free tack rags to remove remaining traces of dust. See “Anti-fouling your boat” and “Painting and Varnishing above the Waterline”for surface preparation and application advice. No. ofProduct nameCoating intervalThinner/Abrasive Comments Coatsat 10°C min/maxCleanerPaper1Seajet Universal24 hrs/14 daysThinner U320 dry Below the waterlinePre-treatment Degrease using SEAJET BOATWASH. Rinse with fresh water. Key the surface and flatten back with P120–P180 abrasive paper. Brush off dust and use lint free tack rags to remove remaining traces of dust. Usewhenan PrimerUndercoatundercoat is Then required2–3Seajet Unythane48 hrs/NoneThinner U400 wet or Topcoatfiner No. ofProduct nameCoating intervalThinner/Abrasive Comments 1Seajet UniversalPrimerUndercoat24 hrs/14 daysThinner U320 dry2–3SeajetGlosskeep24 hrs/NoneThinner U400 wet or Topcoatfiner Coatsat 10°C min/maxCleanerPaper1Seajet11718hrs/3 daysThinner ENoneEpoxy Marine primer Or 1Seajet 11718 hrs/7 daysThinner E320 dry 1Seajet 011 4hrs/7 daysThinner ANoneUnderwater Primer 1–2Seajet8 hrs/NoneThinner ANoneAnti-fouling or two component, high performance ï¬�nish over bare ï¬�bre-glass Or Then Leave 18 hours before launching Osmosis Protection 2Seajet117or11818hrs/72 hrsThinner ENoneEpoxy Primer1–2Seajet8 hrs/NoneThinner ANoneAnti-foulingWhen using Seajet 118, apply a thin coat of Seajet 011 before appyling the anti-fouling. Usewhenan Multipurposeundercoat isEpoxyrequired 2–3Seajet 13212 hrs/NoneThinner P400 wetPolyurethaneor finer Then Topcoat Leave18hoursbeforelaunching.Maximumintervalbeforelaunchingis6months.
Primer application by spray 42

www.seajetpaint.com Helpline01692 406 822

43