This diving regulator has been certified ac-cording to standard EN 250: 2000 which provides a long series of functional tests up to a maximum depth of 50 meters and at a temperature of 4 degrees centigrade (test tolerance range -2°C/ +0°C). If you are not experienced in the use ofthis equipment, we strongly advise you to get familiar with its operation during test diving in shallow waters and under favora- ble conditions; if needed, contact a quali- fied instructor for a refresher course. For any other problem, please contact yourdealer or directly Seac Diving Pro. Only la- boratories authorized by Seac Diving Pro may carry out repairs or maintenance. Seac Diving Pro diving regulators are theresult of a research carried out in close co- operation with many professional divers. Their innovative features ensure a reliabi- lity which remains unchanged even after a long series of dives. At the same time, their easy mechanics and operation allow an ex- tremely simple maintenance.

Introduction

Congratulations for choosing thequality and reliability of a Seac DivingPro product. The equipment you boughtwas produced using selected and testedmaterials. Our constant evolutionresults from continuous research anddevelopment. Innovative productionprocesses, constant testing and actualfunctionality tests developed at ourresearch centre guarantees thereliability characterizing all Seac DivingPro products.
ENGLISH

Warning!

This booklet is not a diving manual! Read the whole instruction handbook before using this equipment! This manual for use must be preserved for the whole life of the product!

During the assembly and regulation of theregulator, every step was taken to ensure high reliability of the product in time. These steps however may become ineffec-tive if the regulator is not used correctly and if adequate maintenance is not provided.Seac Diving Pro s.r.l declines any liabilityfor any problem arising from non-compli- ance with the instructions contained in this handbook.

General Instructions

Before using the regulator or any otherproducts for underwater diving, you should attend a course held by qualified instructors and obtain the relevant diving certificate. The use of diving equipment by non certified divers is dangerous and can lead to serious accidents, or even death, to the diver and his/her diving mates.

Warning!

This diving regulator has been designed to be used with normal atmospheric air complying with the specifications of standard EN 12001.

Danger!

Do not use this or any other product of the Seac Diving Pro line with other gases or oxy- gen enriched air mixtures (usually known as NITROX). Failure to follow this recommenda- tion could cause serious accidents or even death, due to fire or explosions, or seriously damage your equipment.
SEAC SUB 15