video corpo

Step by step yachtoing paints system
1Pages

{{requestButtons}}

Catalog excerpts

Step by step yachtoing paints system - 1

1-2 Epoxy Lightprimer Pot life at 20oC 66hh 2h Thinner for epoxy primers: brush / roll 5% - 10% spray 5% - 50% 2h 4h Antifouling Above system can be over coated with every kind of antifouling selfpolishing as well as hard one 4h 2h Thinner for epoxy primers: brush / roll 5% - 10% spray 5% - 50% Epoxy Lightprimer 1-2 45 min. Thinning not recommanded Antiosmotic HS 2 - 4 Epoxy Primer Epoxy Àller If necessary 1. for leveling small areas universal epoxy Àller is recommended 2. for large areas epoxy lightweight Àller is recommended 3. for thick applications epoxy Àller with Àberglass is recommended 1-2 (apply 5 cm above real waterline) Below the waterline OSMOTIC REPAIR SYSTEM Above system can be over coated with every kind of antifouling selfpolishing as well as hard one 5 days 72 h 5 days 5 days 8h 4h 72 h 4h 8h Epoxy Lightprimer Antifouling 2h Thinner for epoxy primers: brush / roll 5% - 10% spray 5% - 50% Epoxy Lightprimer 1 45 min. 2h Thinning not recommanded Thinner for epoxy primers: brush / roll 5% - 10% spray 20% - 30% (apply 5 cm above real waterline) Below the waterline ANTYOSMOTIC SYSTEM - new hull 5 days 72 h 5 days 4h 3030 min. min. Time before applying next coat Max. Min. Above system can be over coated with every kind of antifouling selfpolishing as well as hard one Thinner for epoxy primers brush / roll 5% - 10% spray 5% - 50% (apply 5 cm above real waterline) Below the waterline Thinner PU brush / roll 15% - 25% spray 45% - 55% Above the waterline Thinning ratio Pot life at 20oC Thinner for epoxy primers: brush / roll 5% - 10% spray 5% - 50% Thinner for epoxy primers: brush / roll 5% - 10% spray 5% - 50% 2h 2-4 2h 4h 4h 30 min. 4h Above system can be over coated with every kind of antifouling selfpolishing as well as hard one Thinner for epoxy primers: brush / roll 5% - 10% spray 5% - 50% If necessary 1. for leveling small areas universal epoxy Àller is recommended 2. for large areas epoxy lightweight Àller is recommended 3. for thick applications epoxy Àller with Àberglass is recommended 1-2 6h Below the waterline 1-3 2h (apply 5 cm above real waterline) Thinner PU brush / roll 15% - 25% spray 45% - 55% 1-2 4h 5 days 5 days 72 h 5 days 5 days Time before applying next coat Max. Min. REMEMBER: • Correct surface preparation is the condition of good product application. • Degrease the work surface, sand with sandpaper, remove dust and degrease again. Wash off salts and any other impurities with fresh water. Use Sea – Line® cleaner. • Minimum temperature for application epoxy products is +10oC. • Do not exceed the recommended amount of hardener. • Mix contents well until mixture is a solid color. • Only mix enough product for immediate use. • Use only thinners recommended by producer. • Epoxy Àllers are the only ones recommended for elements of the hull below the water line. • For epoxy Àllers and non solvent hs epoxy Àller we recommend to apply sea-line epoxy lightprimer before applying the polyester topcoat system. • System below the water line apply 5 cm above real waterline. • Primers do not require polishing when proper amount of time is given between applying separate coats. • Sea-line product usage scheme requires getting acquainted with technical data sheet (TDS) and MSDS. • Always work according to technical data sheet and MSDS. Download TDS and MSDS here: www.sea-line.eu Antifouling Epoxy Lightprimer Epoxy Àller Epoxy Lightprimer Polyurethan Epoxy Lightprimer If necessary 1. for leveling small areas universal epoxy Àller is recommended 2. for large areas epoxy lightweight Àller is recommended 3. for thick applications epoxy Àller with Àberglass is recommended 2h Epoxxy Àller Thinner for epoxy primers: brush / roll 5% - 10% spray 5% - 50% Above the waterline Thinning ratio 1-2 Number of coats Epoxy Lightprimer Product LIGHTSYSTEM Antiosmotic HS 2 - 4 Epoxy Primer Epoxy Lightprimer 1 1-2 Polyurethan Antifouling Number of coats Product GRP BOAT SYSTEM RECOMMENDED STANDARD SYSTEM GRP BOAT SYSTEM Antifouling Epoxy Lightprimer lub Anticorrosion Epoxy Pot life at 20oC Thinner for epoxy primers: brush / roll 5% - 10% spray 10% - 50% 2h Above the waterline Thinning ratio Thinner for epoxy primers: brush / roll 5% - 10% spray 5% - 50% 2h Below the waterline 6h (apply 5 cm above real waterline) Thinner PU brush / roll 15% - 25% spray 45% - 55% 2h 2h 1-2 4h 4h 30 min. 4h Pot life at 20oC Thinner for epoxy primers: brush / roll 5% - 10% spray 5% - 50% 2h Below the waterline Thinning ratio SYSTEM FOR KEEL 2h 45 min. 4h 8h 4h Above system can be over coated with every kind of antifouling selfpolishing as well as hard one Thinner for epoxy primers: brushthinner 5% - 10% spraythinner 5% - 50% Thinning not recommanded 5 day 5 day 72 h 5 day 5 day 72 h 5 day Time before applying next coat Max. Min. Above system can be over coated with every kind of antifouling selfpolishing as well as hard one Thinner for epoxy primers: brush / roll 5% - 10% spray 5% - 50% If necessary 1. for leveling small areas universal epoxy Àller is recommended 2. for large areas epoxy lightweight Àller is recommended 3. for thick applications epoxy Àller with Àberglass is recommended 1-2 Number of coats 1-2 If necessary 1. for leveling small areas universal epoxy Àller is recommended. 2. for large areas epoxy lightweight Àller is recommended. 3. for thick applications epoxy Àller with Àberglass is recommended. 2-3 2-3 1-2 Thinner for epoxy primers: brush / roll 5% - 10% spray 5% - 50% 5 day Time before applying next coat Max. Min. 4h STEEL AND ALUMINIUM BOAT SYSTEM If necessary 1. for leveling small areas universal epoxy Àller is recommended. 2. for large areas epoxy lightweight Àller is recommended. 3. for thick applications epoxy Àller with Àberglass is recommended. 2-3 Number of coats Antiosmotic HS 2 - 3 Epoxy Primer Epoxy Àller Anticorrosion Epoxy Primer Product Antifouling Epoxy Lightprimer Epoxy Àller Anticorrosion Epoxy Primer Polyurethan Epoxy Lightprimer Epoxxy Àller Anticorrosion Epoxy Primer Product Antifouling Epoxy Lightprimer Epoxy Àller Epoxy Woodprimer Polyurethan Clearcoat Polyurethan Clearcoat Poliuretan Epoxy Lightprimer Epoxy Àller Epoxy Woodprimer Product OPTION I Thinner for epoxy primers: brush / roll 5% - 10% spray 20% - 30% 8h Above the waterline Pot life at 20oC WOOD BOAT SYYSTEM Thinning ratio Thinner for epoxy primers: brush / roll 5% - 10% spray 5% - 50% Thinner for epoxy primers: brush / roll 5% - 10% spray 20% - 30% 8h (apply 5 cm above real waterline) 3h 3h Belowe the waterline OPTION I AND II Thinner PU brush / roll 0% - 5% spray 0% - 5% Thinner PU brush / roll 15% - 20% spray15% - 20% Above the waterline 6h 2h 1-2 2h 4h 5h 30 min. 30 min. 30 min. 4h 5h 5 day 7 day 72 h 72 h 72 h 5 day 7 day Time before applying next coat Max. Min. Above system can be over coated with every kind of antifouling selfpolishing as well as hard one Thinner for epoxy primers: brush / roll 5% - 10% spray 5% - 50% If necessary 1. for leveling small areas universal epoxy Àller is recommended. 2. for large areas epoxy lightweight Àller is recommended. 3. for thick applications epoxy Àller with Àberglass is recommended. 1-3 2-4 2-3 2-3 OPTION II Thinner PU brush / roll 15% - 25% spray 45% - 55% 1 If necessary 1. for leveling small areas universal epoxy Àller is recommended 2. for large areas epoxy lightweight Àller is recommended 3. for thick applications epoxy Àller with Àberglass is recommended 1-3 Number of coats

Open the catalog to page 1

All Sea-Line Troton sp. zo.o. catalogs and brochures

  1. COLORS CHART

    1 Pages

  2. STEP BY STEP

    3 Pages