General specifications for laminated rubber fenders - 4 Pages

Add to MyNauticExpo favorites
General specifications for laminated rubber fenders

Catalog excerpts

The laminated fender shall be made from recycled bus and/or truck tires. The rubber shall be free from any major Imperfections that could be deemed to effect the overall fender performance. The fender shall be of the (solid, SR3D-1 single loop SR3D-2 double loop, or SR3D-3 triple loop) construction. The proposed fender shall be capable of absorbing a minimum energy with a maximum reaction at the following design deflection: Minimum Energy Absorption = ? kips (?kNm) Maximum Reaction = ? kips (?kN) (Energy and Reaction values are based on ?) The resilient rubber material component of each...

 Open the catalog to page 2

SR3DTM* BIAS FENDERS ( /ft2 ) 6" Loop with 11" Solid Base 240 220 50 200 45 180 40 160 35 140 30 120 25 100 20 80 15 60 10 40 5 20 0 0% 5% 10% 15% 20% 25% 30% 35% 40% SINGLE LOOP ENERGY ABSORPTION (kip-in) 55 REACTION FORCE (kip) 60 SINGLE LOOP WITH EXTENSION DOUBLE LOOP DOUBLE LOOP SINGLE LOOP WITH EXTENSION SINGLE LOOP 0 45% DEFLECTION * The SR3DTM design is patent protected (Patent Number: 5,957,073) SR3DTM* DOUBLE LOOP RADIAL VS BIAS COMPARISON ( /ft2 ) 6" Loop with 11" Solid Base 220 50 200 45 180 40 160 35 140 30 120 25 100 20 80 15 60 10 40 5 20 ENERGY ABSORPTION (kip-in) 240 55...

 Open the catalog to page 4

All SCHUILER RUBBER CO. catalogs and brochures