Catalogs >
Sammode >
Pauli 2 TGF

Pauli 2 TGF
2Pages

Catalog excerpts

PAULI 2 TGF OPTIMIZED OUTPUT FOR -35°C - 1 OR 2 T8 LAMPS - CLASS 1 IMPERVIOUS TUBULAR LIGHT FITTING FOR USE IN LOW TEMPERATURES Increased mechanical resistance Easy to clean Limited dirt accumulation 360° orientation Absolute imperviousness Favours a constant temperature in the light fitting No internal dust accumulation Maximum light output Adapted for pressure cleaning Mechanical assembly not sensitive to external mechanical and/or chemical aggression High resistance to shocks and corrosion Single piece casing, material and components selected to ensure long-term investment ELECTRICAL CLASS FIRE RESISTANCE Coex. polycarbonate/PMMA SHOCK RESISTANCE OPERATING TEMPERATURE 2 lamps on 1 lamp on* *Separated electric supply for the lamps will be required • Ø133 mm crystal quality polycarbonate diffuser • Also available in coextruded polycarbonate/PMMA for agri-food environments • End caps 1/2 ring press-formed in 304L stainless steel (316L also available) • Gaskets moulded in EPDM • Cable entry with cable gland in nickel-coated brass (detachable plug available) GEAR TRAY • Low loss compensated ferromagnetic gear unit (EEI B1) • Internal wiring with silicone isolation braided with glass fibre, possible separated output for the lamps if used in positive temperature • Supplied with IRC85 4000K high output fluorescent tube(s) • White powder-coated plate for one or two 58W T8 fluorescent tubes • Triple casing system for the fluorescent lamps • Reflector in mirror finish aluminium sheeting INSTALLATION – MAINTENANCE • Connection to 5x2,5 mm² detachable terminal block with possibility to feed the lamps separately (compulsory switch-off of the lamp when using a luminaire at a temperature up to 10°C) • Attachment with 2 bolt-fitted stainless steel straps with variable centre distance and allowing 360° orientation (available as a reinforced model and/or with closure by HSHC screw) • Maintenance: release the 2 closing screws, remove the end-cap and extract the gear tray 1• T8-2-lamp model extensive reflector at -35°C

Open the catalog to page 1

MAIN REFERENCES OPTIONS Room temperature With cable gland PAU2 TGF 258C G13 PO 113LN RE With straight disconnectable plug PAU2 TGF 258C G13 PO PS5 RE DIFFUSERS Coex. polycarbonate diffuser CABLE ENTRIES 1 or 2 cable glands in nickel-coated brass Cable Ø: 5 to 14 mm DESCRIPTION Variable centre distance OPTION CODE IMPORTANT INFORMATION: DIFFICULT ENVIRONMENTS At low temperatures, it is recommended that you use the 58W fluorescent tube, as their intrinsic operating temperature is far higher than that of 36W tubes. At –35°C, the flux of tubes at turn-on is 30% less than the flux emitted after...

Open the catalog to page 2