Sabre 386 - Sabre Yachts - #1

- 3M 5200 Polyurethane sealant in the deck to hull joint.

- Propane storage locker in starboard side deck

- Edson wheel steering with 40" five spoke Comfort Grip Destroyer wheel, guard and brake.

- Ritchie SP5 compass mounted in binnacle.

- Emergency tiller stored in cockpit locker.

- Balanced rudder is molded fiberglass bonded to a carbon fiber rudder post passing through a removable UHMW bearing and support tube securely laminated to the hull.

- Yanmar 40 hp 3JH4E fresh water cooled diesel with reduction gear. Electric shut-off.

- Single lever engine control

- 12-volt 80 amp alternator.

- 40 gallon custom aluminum fuel tank, deck filled, shut-off valve, vented and grounded.

- Racor fuel filter/water separator.

- Raw water intake strainer with wrench.

- Four point engine mount system optimized to reduce vibration and noise.

- Engine compartment exhaust blower.

- Engine compartment light.

- Complete engine access though sound and heat insulated removable panels.

- Tach, hour meter, volt, fuel, oil and temperature gauges are recessed in cockpit face.

- 1-1/8" Aquamet (or equal) prop shaft passes through a glassed-in PYI drip less shaft seal with bronze strut, right hand two blade sailor propeller.

- A modern fin keel cast in lead with antimony added for strength.

- Thru-bolted to a reinforced keel sump with stainless steel bolts and bronze nuts.

- Four (3- house and one engine start) 12-volt 110 amp group 31 deep cycle marine batteries with sealed 2 position battery switch.

- 110V shore power system with GFI protection and 50 foot shorepower cord

- Pro Mariner battery charger

- Master AC/DC Bass 6200 marine circuit breaker panels (black) located at the chart table, include AC/DC volt and ammeters, and polarity indicator. Space is provided for additional breakers and electronic gear.

- 12V outlet at chart table

- Macerator pump on head.

- All wiring is tinned, color coded and meets USCG standards.

- 12V Sea Frost refrigeration unit

- Microwave oven in galley

- 5 Lewmar polished Ocean Series deck hatches with Ocean Air blinds/screens.

- 2 stainless steel dorade vents.

- 4 main cabin fixed port lights of Marguard Lexan.

Sabre 386 SPECIFICATION

L.O.A.......................................................38' 7"/11.79 m

L.W.L........................................................32' 6" 9.91 m

Beam.........................................................12' 8" 3.86 m

Draft:

Deep Keel...............................................6' 10" 2.08 m

Wing Keel...............................................4' 10"/1.47 m

Displacement (lbs.):

Deep Keel.................. 16,500 lbs/7.57 t (est)

Wing Keel..................17,300 lbs/8.01 t (est)

Ballast (lbs.):

Deep Keel..................... 6400 lbs/2.79 t(est)

Bulb/Wing Keel............ 7200 lbs/3.24 t(est)

Rig Dimensions:

P........................................................ 45.33' 13.82 m

E........................................................ 16.50' 5.03 m

I........................................................ 51.83' 15.03 m

J......................................................... 15.00' 4.57m

Total Sail Area (sq. ft.) ............ 763 sq ft/70.88 sqm

Main Halyard/Reef winch...............................40 CST

Jib Halyard and mainsheet winch.....................40 CST

Primary winches...............................................50 CST

Cockpit Length.......................................7' 5"/2.26 m

Headroom..............................................6' 4"/ 1.93 m

Water Tanks -2 (Total gals.).................90 gals/338 l

Holding Tank (gals.).............................30 gals/112 l

Batteries (No. @ Amp Hrs.).4 @ 110 (3-house, 1-start)

Berths (No. @ Sizes)..........................................7

Hatches........................................................................5

Stainless Steel Dorades ................................................ 2

Opening Ports.............................................................6

Fixed Ports...................................................................4

Destroyer Wheel (Diameter)....................40"/1.21 m

Auxiliary Engine Yanmar............................40 Hp

Fuel Tank (gals.)...........................................40/150 l

PHRF Rating (Average)..................................81 (est)

Mast Height Above W.L....................56'4"/17.17 m

Built to NMMA, ABYC, USCG and CE Category A standards

- Single unit, hand-laminated E glass, cored with Divinycell closed cell PVC foam .

- ISO NPG gelcoat.

- Below waterline chopped strand glass and vinylester resin as a back up for ISO NPG gelcoat.

- Internal deck to hull joint.

- Double boot and single cove stripes.

- Bulkheads, berth faces, shelves and floor stringers laminated to hull providing integral, structural strength.

- Step transom

- Single unit, hand-laminated fiberglass with Divinycell core for stiffness, and Divinycell HD core in high stress areas.

- The deck is fastened to the hull using stainless steel thru bolts.

Sabre 386