• Products
  • Catalogues
  • News & Trends
  • Exhibitions

Clean combustion for the future - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

Product information LONOX UCC (Ultra Clean Combustion) System Clean combustion for the future SAACKE LONOX UCC – below 30 mg/m3 NOX emissions Energy and heat supply Chemical industry Refineries Food industry Building materials industry Steel and metal production Waste incineration And more … Worldwide emission limit values for the industry are decreasing. For example, this is demonstrated by the Chinese regulations, which specify since 2017 for new power stations and energy generation plant and public district heating projects a strict NOX limit value of 30 mg/m³ based on 3% dry O2 in urban areas such as Beijing. For existing plants, this regulation enters into force in a few years. This demands on sophisticated technical solutions: The SAACKE LONOX UCC (Ultra Clean Combustion) System. Certified and reliable quality All benefits at a glance   Extremely low NOX emissions (< 30 mg/m³) based on 3% O2, dry   Control range up to 1:10 (depends on burner design)   Excess air ratio under 15% at 100% MCR Compliance with future guideline values has been certified in 2016 by the German TÜV (Technical Inspection Authority). The SAACKE LONOX UCC System ensures compliance with the emission values without expensive additives and works cost-effective and efficient.   Also suitable for extremely short furnaces Suitable for different boiler design  Reduced operating costs due to high-efficiency combustion technology and low auxiliary power requirement The burner is suitable for different boiler design, different refractory arrangement in firing chamber and different firing chamber geometry. Moreover the system is covered for different fuel gas supply pressure. The burner draft loss of the combustion air is lower than 25 mbar (depending on the burner design).   Less maintenance time and exceptionally long life   TÜV-certified emissions without secondary measures or additional additives   Suitable for shell boilers and water-tube boilers  Conforms with European

 Open the catalogue to page 1

The SAACKE solution in detail A special, swirled flame geometry as well as a specially-engineered flame control enables the burner to do without common methods of nitrogen oxides reduction, such as catalytic (SCR) or non-catalytic (SNCR) processes, installing cooling fins or water injection. The burner combusts reliably all standard gaseous fuels in compliance with the strictest limit values – with a low flue gas recirculation rate of < 25%. Conclusion The SAACKE LONOX UCC is a reliable and market-tested combustion solution. The burner is characterized by extremely low, environmentally friendly...

 Open the catalogue to page 2

All SAACKE catalogues and brochures

  1. Pulverized fuels

    2 Pages

    En
  2. SSB swirl burner

    2 Pages

    En
  3. LONOX UCC

    2 Pages

    En
  4. EGCS-HM

    2 Pages

    En
  5. Spare parts

    2 Pages

    En
  6. Boiler Training

    2 Pages

    En
  7. Boiler Repair

    2 Pages

    En
  8. 03 PB DDZ-M

    2 Pages

    En
  9. 05 PB SKV-A

    2 Pages

    En
  10. FMB-VF-Lonox

    2 Pages

    En
  11. 14 PB FMB-VD

    2 Pages

    En
  12. 19 PB EME-VFT

    2 Pages

    En
  13. 08 PB CMB-VS

    2 Pages

    En
  14. 09 PB CMB-HF

    2 Pages

    En
  15. 20 PB FMW-VD

    2 Pages

    En

Archived catalogues

  1. System Progress

    32 Pages

    En