www.rule-industries.com

Rule Submersible Bilge pumps have set the standard for the industry for decades. They are the first choice ofyachtsmen and commercial fishermen throughout the world. More innovations in Bilge Boat pump design have come from Rule Industries than any other manufacturer and we are proud to offer the broadest range of bilge pumps in the world. These "All-In-One" pumps feature Spongeability™, which is unique toRule and one of the main reasons for our Innovation Award. When the water level is reduced to about 3/4", every other pump on the market shuts down. The new Rule-Mate

1

Exclusive moisture tight sealsCompact, efficient, long life motors Easy clean snap-lock strainer bases Completely submersibleSilent and vibrationless operationIgnition protectionAnti-Airlock protection No burn-out when run dryStainless steel shaftsRust and corrosion protectionCE and ISO 8849 certification

Rule-Mate

®

Automated Bilge Pumps

The Rule-Mate series of Automated Bilge Pumpsfeatures a pump and a non-mercury float switchin a single, compact housing. When the float rises, the pump turns on. There is no on/off cycling and therefore, no power use until the pump comes on.The pump remains on until the float drops and thepump senses no load against the impeller. Introduction Rule-Mate
® Bilge Pumps

AwardWinning!

® remains on for an additional15 seconds, removing 50% more water, drastically minimizing odors and excess water. A great benefit to boaters everywhere!
Pumps-

Automatic Bilge Pumps

Computerized operation on the principle of impeller resistance. Float switches are not required. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, thepump will sense resistance and continue to run until all water is removed.Thereafter, it will check for water every 2-1/2 minutes. Power use in the checking mode is minimal. Fully Automatic Bilge Pumps

Non-Automatic Bilge Pumps

Traditional operation activated by a float switch or panelswitch. Rule’s Cartridge Series Bilge Pumps have the addedfeature of replacement motors. This allows you to carry a spare motor, providing an extra level of security and protection. Removal of the motor also allows cleaning ofthe strainer and impeller area in the event that the pumpbecomes clogged. Replacement motors are sold separately. Non-Automatic Bilge Pumps

04